Deaver +2 or Deaver +3 with Shackle?

[dewalt]

Geisers and plus 4 deavers HD is a factory look. SVC bump stop with a 2.5 x 4 cylinder will let you load up

 

[sixshooter_45]

Geisers and plus 4 deavers HD is a factory look. SVC bump stop with a 2.5 x 4 cylinder will let you load up

Are the Deaver's HD +4 a rough ride with the bed empty?

 

[dewalt]

I do not know . Never been empty.

 

[sixshooter_45]

I do not know . Never been empty.

Ok, thanks. Trying to decide between HD and regular springs.

Some say Geiser springs up front and Deaver's +3 and some say Deaver's +4 gives a stock look.

Eventually I want to set this up for overland camping and off roading with a few extra inches of lift.

 

[coachhomer]

Do the Fox 3.0 fronts come shipped at mid perch? I am level right now at mid perch and I am going to add the +3 Deavers in the back and the Fox 3.0s in the front. From what I am reading that will put me 1” higher in the back? If the 3.0s come mid perch.

Anyone? Bueler?

Sent from my iPhone using Tapatalk

Sent from my iPhone using Tapatalk

 

[dewalt]

Put a set of 4 inch bump stops on in bottom holes and go camping

 

[GBRaptor34]

Are the Deaver's HD +4 a rough ride with the bed empty?

no not really

 

[dewalt]

Plus 4's lift the back 2 inches. Geisers lift the front about the same. The hds are the way to go if using the bed for anything more than a suitcase. With the bump stops you can vary nitrogen to give you whatever load capacity you need. You can get a 2 or 4 inch stroke bump stop. If you had a pair of 2 and a pair of 4 you can do anything.I think you can get 11,12,13 leafs depending on application

 

[dewalt]

RPG or SVC make good bump stops

 

[Badgertits]

Plus 4's lift the back 2 inches. Geisers lift the front about the same. The hds are the way to go if using the bed for anything more than a suitcase. With the bump stops you can vary nitrogen to give you whatever load capacity you need. You can get a 2 or 4 inch stroke bump stop. If you had a pair of 2 and a pair of 4 you can do anything.I think you can get 11,12,13 leafs depending on application

Do you need to add bump stops period when swapping leafs even these HD/+4s?

I mean I’ve seen bump stops that are simply hard rubber on a metal block & ive seen em be essentially a shock itself w/ nitrogen or hydraulic fluid whatever- is there a cheap option?