Collar on new R

[BoostCreep]

That rear end is actually a bit higher than the front

The 24R sits about 1” higher than the 23R. From what I’ve heard the dual valves are running more nitrogen pressure and it preloads the rear slightly.

 

[laloans]

The 24R sits about 1” higher than the 23R. From what I’ve heard the dual valves are running more nitrogen pressure and it preloads the rear slightly.

Yup, this is correct. Having the 1" spacer removed this week and will keep the 2.25" Front perch and see how that looks/feels.

 

[laloans]

Got it fixed! Removed rear spacer and kept 2.25 front collar.

 

[MultiStateRaptor Guy]

Well done.

 

[nelsonr103]

I don't get you guys. I know it's all personal preference, but why spend $150k on a FINELY tuned suspension just to change it

 

[MultiStateRaptor Guy]

It's there checkbook to do as they please, for me the raptors sit front end heavy, meaning they dip down in their front ends. I just added a SPD 1.5" collar and had it re-aligned. Easy, Peasy.

 

[GEN3LV]

I have been on the fence about leveling my 24R it sits pretty good stock. There is a company in Vegas (Aftermarket HQ) they do a lot of Raptor mods the owner sent me these pics of a 24R they just did with RPG Top hats and 1" Eibach front springs and KMC wheels. I think it sits pretty good with this setup. So thinking about going this route at some point.

 

[MultiStateRaptor Guy]

My opinion: They want to sell you Eibach springs plus labor, for me the RPG 2.5" collars and another alignment solved the leveling set-up, and there is "no" loss of travel or suspension, and I feel "zero" difference in driving or making U-turns @ low, mid range or high speed.

 

[BadWRP]

23R here. Running M26 Engineering 1.25” collar. Suspension difference is barely noticeable rides like stock. 1/4-1/2” nose high at best.

 

[GEN3LV]

My opinion: They want to sell you Eibach springs plus labor, for me the RPG 2.5" collars and another alignment solved the leveling set-up, and there is "no" loss of travel or suspension, and I feel "zero" difference in driving or making U-turns @ low, mid range or high speed.

I had Eibach 1" installed on my 22 to level it and there were great rode better than stock and looked perfect. So not opposed to doing the same to the 24R but currently I am pretty happy with how it sits stock. Not on the top of my mod list at the moment.