GEN 2 Can’t seem to get markers and parking lights to stay on with FORScan

[ksgries]

For the life of me I can’t get the parking lights and side markers to stay on. For whatever reason it seems to revert to low beam and parking light..lame.

Anyone had this issue?

My bcm settings are correct for turn signal and parking light, I can’t remember if it reverted when I changed position lamp config but I don’t have the stock setting to switch it back




Sent from my iPhone using Tapatalk

 

[Antho]

What values do you have?

 

[Travis Runty]

You sure that you are testing it while in drive?

 

[ksgries]

What values do you have?

I’ll grab them in in minute

You sure that you are testing it while in drive?

Yeah I put it in drive and put the parking brake on and looked at it and I can tell from reflections from vehicles in front of me


Sent from my iPhone using Tapatalk

 

[ksgries]

What values do you have?

726-45-01. 0A00 7F01 01FE
726-26-02. 0100 0000 0056
726-50-01. 0886

Then position lamp config is
726-29-02 0100 0001 005A




Sent from my iPhone using Tapatalk

 

[sixshooter_45]

Following

 

[Antho]

May want to try setting this back to DRL only and not DRL_position. change the 1 to 0. See if that works. Only thing i see different.
726-29-02 0100 0001 005A
726-29-02 0000 0001 005A

 

[MEATSWORD]

DRL - Parking Lights & Turns only TL-1A M-1A
9
726-45-01 xxxx 7Fxx xxxx
10
726-26-02 x1xx xxxx xxxx
11
726-50-01 08xx
12

That's what I came up with from the spreadsheet.

 

[ksgries]

May want to try setting this back to DRL only and not DRL_position. change the 1 to 0. See if that works. Only thing i see different.
726-29-02 0100 0001 005A
726-29-02 0000 0001 005A

Bingo! That did the trick, so drl position turns the low beams back on

Thanks! I figured that’s what did it. Should have saved my original values lol


Sent from my iPhone using Tapatalk

 

[David Goodman]

So what is the outcome of the DRL correct code? Pics?