Camper shells

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Idaho Savage

FRF Supporting Member
Supporting Member
Joined
Jan 26, 2022
Posts
118
Reaction score
213
Location
USA
I put a Leer on my 21. Went with the gull wing windows...huge benefit for accessing the cab and they have sliders as well for my dogs in the summer. I also like that the topper licks with the truck's doors via the key fob.
 

Fella33

Member
Joined
Jun 6, 2021
Posts
40
Reaction score
24
Location
Newfoundland, Canada
No, a Gen 2 shell will not fit a Gen 3, at least a Snugtop will not fit it. I have a shell on my Gen 2 and hoped to transfer it to my Gen 3, but was told by Snugtop there is a 2” difference in width. August 31 I ordered another shell and was told 12-16 weeks for delivery.
Has anyone else tried to put a older cap on a gen 3. The bed dimensions are the same as gen 2. Maybe the difference is in the thickness of the bed sides?
 

K9 EXPERT

Full Access Member
Joined
Oct 10, 2021
Posts
611
Reaction score
626
Location
Idaho
Has anyone else tried to put a older cap on a gen 3. The bed dimensions are the same as gen 2. Maybe the difference is in the thickness of the bed sides?
my original intention was to move my Snugtop from my gen 2 to my gen 3, but the Snugtop dealer said, due to width it wouldn’t fit, so I ordered another Snugtop, which after six months still hadn’t arrived, so I put a Smart Cap on it. Today, I will find out if I solved the water leak issue. Before I take it to have PPF installed I will run it thru a car hand only wash with high pressure blowers.
 

Attachments

  • 30D4EE41-E98B-477F-9165-648914D7A98C.jpeg
    30D4EE41-E98B-477F-9165-648914D7A98C.jpeg
    240.1 KB · Views: 92

K9 EXPERT

Full Access Member
Joined
Oct 10, 2021
Posts
611
Reaction score
626
Location
Idaho
Please I am really struggling on smart cap vs another leer.
I placed burly tape inside the air vent on top of the cap and it worked beautifully! Afterward I took it thru a car wash and it is watertight! I think it looks much better than the Snugtop I have on my 2019, the cost is about the same…$5k. I am actually thinking of selling the snugtop and replacing it with another Smart Cap.
 

Attachments

  • 96D75A6F-FDE7-4B4C-843B-DA118AB55151.jpeg
    96D75A6F-FDE7-4B4C-843B-DA118AB55151.jpeg
    172.2 KB · Views: 103
  • 5BFCF2A5-FE85-429D-917B-B38DAED3B865.jpeg
    5BFCF2A5-FE85-429D-917B-B38DAED3B865.jpeg
    165.5 KB · Views: 107

Sierraraptor

Full Access Member
Joined
Oct 25, 2021
Posts
144
Reaction score
161
Location
Reno
I am super interested in hearing about the heat side of the equation. I also have dogs in mine daily and love in an area that gets pretty damn hot in the summer. Surprisingly my leer did not get hot at all (white). Are you going to line the underside with anything? My jeep top is black and granted its completely apples to oranges but it gets hotter than f((# all.
 

djhub

Member
Joined
Dec 5, 2022
Posts
2
Reaction score
0
Location
Woodstock, GA
Sorry, yes Gen 3 is wider! The Snugtop I ordered cost a bit over 4K, but I got the large windows, rack rails and increased load capacity. Without those options, I think it was about 3k.
No, a Gen 2 shell will not fit a Gen 3, at least a Snugtop will not fit it. I have a shell on my Gen 2 and hoped to transfer it to my Gen 3, but was told by Snugtop there is a 2” difference in width. August 31 I ordered another shell and was told 12-16 weeks for delivery.
 
Top