forscan tire size change

[greatone99]

anyone know the hex numbers /letters u input in forscan ,going from 35 to 37 , ko2

 

[MORaptor1]

Only have to make the below changes. The 726-15-01 is the same as the 1st 2 digits of the tires circumference are the same. Just the last 2 digits. 35" (0A5D) and 37" 0AC1)

37" = 726-15-02 C1xx-xx
35" = 726-15-02 5Dxx-xx

 

[greatone99]

Only have to make the below changes. The 726-15-01 is the same as the 1st 2 digits of the tires circumference are the same. Just the last 2 digits. 35" (0A5D) and 37" 0AC1)

37" = 726-15-02 C1xx-xx
35" = 726-15-02 5Dxx-xx

thanks, do u need to reset any modules / trans /ride height /ect

 

[MORaptor1]

Yes you will do a trans relearn. It’s all super easy. I did it with my 35-37 truck. Speedo is spot on now. I am on the factory 37 bfg’s, but I’d venture to guess it will be near spot on with any “37” tire you use. I didn’t do anything else, nor would I.

 

[greatone99]

Yes you will do a trans relearn. It’s all super easy. I did it with my 35-37 truck. Speedo is spot on now. I am on the factory 37 bfg’s, but I’d venture to guess it will be near spot on with any “37” tire you use. I didn’t do anything else, nor would I.

thanks ,so i basically input c1 on 726-15-02 ,do a trans relearn , maybe a ride height recal and be done

 

[MORaptor1]

Don’t do the ride height. Just the other stuff.

 

[greatone99]

Don’t do the ride height. Just the other stuff.

im getting the tires, with the new 315 mhz tpms sensors installed, do i need to reset the system and activate the new sensors

 

[MORaptor1]

im getting the tires, with the new 315 mhz tpms sensors installed, do i need to reset the system and activate the new sensors

Not sure on that. I swapped the sensors from my own wheels.