Best way to clean the shocks

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Halo Raptor

Full Access Member
Joined
Feb 12, 2019
Posts
409
Reaction score
191
Location
Monrovia, CA
is your mountain bike pink, or is the cleaner pink? Not judging....just asking. ;)
its 2020, maybe a little of both.....Dont ask dont tell...lol.. No its this clear bottle with pink cleaner liquid for cleaning mountain bikes. Spray on, leave for a few then wet and brush off. Cleans dirt road and grime off pretty good.
 

Raptor Vet

Full Access Member
Joined
Dec 9, 2018
Posts
354
Reaction score
431
Location
Virginia
its 2020, maybe a little of both.....Dont ask dont tell...lol.. No its this clear bottle with pink cleaner liquid for cleaning mountain bikes. Spray on, leave for a few then wet and brush off. Cleans dirt road and grime off pretty good.
Just google "clear bottle with pink cleaner liquid"....lol
 

allinon72

Full Access Member
Joined
Jun 1, 2019
Posts
385
Reaction score
377
Location
Indianapolis, IN
I don’t see a need for such harsh chemicals...I’d be worried about pitting or etching the anodizing/aluminum. Why not just spray them off?
 

Nesc204

Full Access Member
Joined
Mar 26, 2018
Posts
401
Reaction score
452
Simple Green full strength and rinse off. If really caked on grime I'll use a pressure washer with simple Green but DO NOT aim down on top of struts or up on shocks where the piston slides or you will damage the Seal then your shocks will Leak
 

Troutrad

Full Access Member
Joined
Jan 24, 2020
Posts
587
Reaction score
594
Location
Kalispell, MT
Like Allinon72, I had some ceramic product left over after a couple coats on my rig (Avalon King was my choice). Very little product will take care of your shocks for a long time. They spray off so much easier.
 

D11gnccer

Active Member
Joined
Mar 23, 2019
Posts
96
Reaction score
116
Location
Columbus Ohio
I had planned on IronX or an APC, I am currently using meguires d101 diluted to various strengths for tires and wheels. Honestly though, I’ve not had a chance to drive mine to need to clean them. 3200 miles in 11 months of ownership. :(

Once you do clean them, you might look for a product like McKees hydro blue or Wolfgang deep gloss paint sealant.
 

Oldfart

FRF Addict
Joined
Oct 21, 2017
Posts
6,023
Reaction score
14,937
Location
Saggy Balls Division of PA Trump Army
Simple Green full strength and rinse off. If really caked on grime I'll use a pressure washer with simple Green but DO NOT aim down on top of struts or up on shocks where the piston slides or you will damage the Seal then your shocks will Leak

You beat me to it. I was just going to say, be careful of the seals with a pressure washer. Guys damage their seals all the time on motorcycles from getting too aggressive around the seals with a pressure washer. You can drive the dirt into the seals and the grit will destroy them. Riders see the mechanics at races hammering on bikes with a pressure washer and they forget that those same mechanics will be replacing and rebuilding everything a day later.
 
Top