Baja Designs: General Discussion Thread - GEN 2

[Baja Designs]

I already have a 30” OnX6 LED bar and want to install it behind the grill. Do you sell just the mounts to do this?

View attachment 123270

View attachment 123271

BD will chime in but I'm pretty sure there is not enough room to mount those behind the grill....pretty sure this why they use the small single row S8...those "smaller" lights kick ass for their size!

@Loufish is correct - the OnX6 housing is too deep to fit behind the grille. It will interfere with the electric cooling fins that are back there.

I'm not aware of a workaround or alternative that you can use to fit the OnX6 behind the grille of a 2nd Gen. Sorry

Baja Designs
www.bajadesigns.com

 

[Baja Designs]

Was hoping this was one of those lights that mount up above rear bumper and under tailgate as all those seem lousy quality.

Sorry, it's a little too large to squeeze in that location. The tailgate would have to come off :/

Baja Designs
www.bajadesigns.com

 

[Baja Designs]

Interested in checking out Baja Designs Laser Lighting? Want to know how they compare to our LED offerings?

We are doing at night demonstration at Overland Expo West. Our booth will be set up during the day with our product line. Stop on by and check out the latest and greatest from BD!

Booth P10

Overland Expo West | 5/17-5/19
https://www.overlandexpo.com/west


(XL Laser)


(Hybrid LED/Laser OnX6)

 

[Baja Designs]

All set up at Overland Expo West!

Come on by

Booth P10

Baja Designs
www.bajadesigns.com

 

[TheCappy]

Any tips on opening up the 3m 901 box connector on the upfitter wiring harness? Trying not to cut any wires.

 

[RadRaptor]

will the center grill light work with Cobb IC?

 

[RomoLS]

Got my fog pocket kit installed last night, squadrons rub the bumper and cant get too much adjustment on them and also want to add covers bus have no space. Anyone else has had this issue?

 

[RomoLS]

Want to add this covers

 

[Baja Designs]

will the center grill light work with Cobb IC?

I don't believe there is enough clearance with a larger intercooler. The clearance is tight as-is. Hopefully, someone else can chime in

Baja Designs
www.bajadesigns.com

 

[Baja Designs]

Got my fog pocket kit installed last night, squadrons rub the bumper and cant get too much adjustment on them and also want to add covers bus have no space. Anyone else has had this issue?

View attachment 123746

Want to add this covers

Do you have a few other pics of how the lights are mounted? Can you show a close up of the mounting system?

Baja Designs
www.bajadesigns.com