Aux 1 not functioning any longer

[sixshooter_45]

Probably drawing more amps than the stock fog lights which is why it blew.

 

[smurfslayer]

Yeah, fuses don’t blow for no reason.

 

[GreatAvalon]

Anyone know what the factory fog light fuse is rated for?

 

[smurfslayer]

If I read correctly, you had 2x sets of lights on up fitter 1? that’s 4 lamps total. IIRC the b/d squadron pros ( i know, not what you have but I’m drawing a blank on “d2pod” ) are rated 3.1 or 3.3 / cube. 6.6 x2 =13.2 amps... give or take

as previously posted, Jen Tres up fitter 1 = 10a.
you either need a relay or move a set to another up fitter.

 

[ericburney]

Thanks as well ! 22 had the same issue....

 

[goodshot]

My aux 1 on factory wiring with Squadron Racers just went out.

Is replacing fuse 62 the answer?

 

[The Car Stereo Company]

no clue. with only half the information, we cant answer that.

 

[goodshot]

no clue. with only half the information, we cant answer that.

I don't quite understand the gen 3 upfitter switches and their amperage ratings etc.

I have a 2022 37" with the factory fogs changed out to Baja Designs S1 and Squadron Pros jumperrd together on the factory headlight fog switch wiring, and a set of Squadron Racers on the factory Aux 1.

I am not familiar with where the fuses and connections are since I used all the factory connection points.

Last night my Aux 1 Squadron Racers went out.

 

[MultiStateRaptor Guy]

Run a relay with all of these auxiliary switches, that should clear up all the unknowns.

 

[goodshot]

Ok I found Fuse #62 10amp blown.

Is a single set of Squadron Racers too much for this 10amp circuit?

Why is Aux1 10amp and the other appear to be 15?

@Baja Designs