Anyone running the VenomRex VR-602 wheels?

[FordPerf Addict]

I see these are 17x9 with a 12 offset...
I see a lot of other wheel options as a 17x8.5 with a 1 or 0 offset.

Does this make the stance the same or do they 17x8.5s +0 stick out just a tad further?


Sent from my iPhone using Tapatalk

 

[Tommerbommer]

If so do you have any pictures installed. I am looking at them and would like to see some side shots. I am leaning toward graphite on my agate black Raptor.

I have them. VENOM REX® - VR-601 Carbon Graphite (20" x 9", +12 Offset, 6x135 Bolt Pattern, 87mm Hub)

 

[Nick@Apollo-Optics]

I see these are 17x9 with a 12 offset...
I see a lot of other wheel options as a 17x8.5 with a 1 or 0 offset.

Does this make the stance the same or do they 17x8.5s +0 stick out just a tad further?


Sent from my iPhone using Tapatalk

They're pretty similar to one another.

Stock wheel is 17x8.5 +34 offset.

A 17x8.5 0 offset wheel is pushed out 1.34" over stock.
A 17x9 +12 offset wheel is pushed out 1.12" over stock.

So roughly 1/4" difference between the two.

The VR wheels are known for fitting flush with the edge of the fender flare.

Please let me know if you have any questions!

 

[FordPerf Addict]

They're pretty similar to one another.

Stock wheel is 17x8.5 +34 offset.

A 17x8.5 0 offset wheel is pushed out 1.34" over stock.
A 17x9 +12 offset wheel is pushed out 1.12" over stock.

So roughly 1/4" difference between the two.

The VR wheels are known for fitting flush with the edge of the fender flare.

Please let me know if you have any questions!

Just thinking of a future setup and which offset would look best. Likely new geisers, or just going 3.0 factories all around with option 2 icon leafs.
so with the increased height I want the truck to have the right stance that won’t interfere or rub fenders off-roading


Sent from my iPhone using Tapatalk

 

[cubsalltheway]

Just thinking of a future setup and which offset would look best. Likely new geisers, or just going 3.0 factories all around with option 2 icon leafs.
so with the increased height I want the truck to have the right stance that won’t interfere or rub fenders off-roading


Sent from my iPhone using Tapatalk

I have King 3.0 with Deavers +3.
Went with 17" and have zero issues with rub with wheel at full lock.
Can't comment on off-road issues but the weight reduction was a major deciding factor for me