GEN 2 anybody done RPG 3" collars w 4+ deavers?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Skyline

FRF Supporting Member
Supporting Member
Joined
Aug 20, 2013
Posts
159
Reaction score
47
Shackle drops the rear end 1" and allows for additional articulation on long travel kits.

---------- Post added at 12:26 AM ---------- Previous post was at 12:25 AM ----------



0 Offset. If I had a Gen 2, I'd go with this exact set up.....at least until i long traveled it with our BOLT/RST combination. :)
Any time offroad with 3" collars? Does performance suffer with that much tension on the springs?

Sent from my SM-G955U using Tapatalk
 

MajorAR

FRF Addict
Joined
May 28, 2013
Posts
2,078
Reaction score
2,189
Location
Kansas
anybody done RPG 3" collars w 4+ deavers?

Personally no, but we have many customers that drive their trucks hard with all 3 sizes of RPG collars; dating back to January of this year when we first introduced them. No issues.


Sent from my iPhone using Tapatalk
 

Intricate

Member
Joined
May 14, 2013
Posts
39
Reaction score
16
Location
Grande Prairie, AB
Fresh 37 KO2s, Method standards, RPG 3" collars up front and Deaver +3s with RPG shackles. [emoji14][emoji1417]. Measures 40" from ground to top of wheel well on all 4 corners.


ec0e94af89b7d99286522c3e0c3fbe5c.jpg

1cad3c46dc8e49f16c0c9daee4cd1e62.jpg

5e95de498130ebe2fb20fa900825aba1.jpg

b9a17370a2accbe30f48dc348e932956.jpg

1c9040c6c2294edee8526101531519df.jpg

14882ea6fadfa21a5c56f860089e46ac.jpg


Sent from my iPhone using Tapatalk
How were you able to stay level with 3+ front spacer, 3+ rear Deavers and shackles (which lower about an 1'?). End result of 3" ride quality? I think it is too soft factory. I was recommended to run your 3+ Deavers and shackles with 2.25 front. I would like to run 37's until all the fender bedside brands have come to market. Then upgrade.
 

Sitdown

FRF Supporting Member
Supporting Member
Joined
Oct 28, 2012
Posts
1,617
Reaction score
1,521
Location
Suburbia, IL
How were you able to stay level with 3+ front spacer, 3+ rear Deavers and shackles (which lower about an 1'?). End result of 3" ride quality? I think it is too soft factory. I was recommended to run your 3+ Deavers and shackles with 2.25 front. I would like to run 37's until all the fender bedside brands have come to market. Then upgrade.

I'm running the +3s and 3" collar. Loaded with rack/gear, Im ~ level with the front, and ride is incredible. Empty bed, im ass high. With stock leafs i was noise high.

I think the 3" collar and +3's are a great pairing. I bought the drop shackles to not have an ass high look, but doesn't look to be necessary for me currently, and can retain a cushier ride. May be different on another truck tho. Id think you would want a 3" collar at minimum for 37's. The shackled rear and the 2.25" do make sense though. I'm only sitting ~2.00-2.25" higher than stock up front with the 3" collar. I do a lot of 4H use when on runs, lotta jumping and G outs, no cases of CV/torsen binding issues at this height. Ideally id like to get slightly more height up front, but the 3" collars are really a perfect match for these leafs.
 

Intricate

Member
Joined
May 14, 2013
Posts
39
Reaction score
16
Location
Grande Prairie, AB
I'm running the +3s and 3" collar. Loaded with rack/gear, Im ~ level with the front, and ride is incredible. Empty bed, im ass high. With stock leafs i was noise high.

I think the 3" collar and +3's are a great pairing. I bought the drop shackles to not have an ass high look, but doesn't look to be necessary for me currently, and can retain a cushier ride. May be different on another truck tho. Id think you would want a 3" collar at minimum for 37's. The shackled rear and the 2.25" do make sense though. I'm only sitting ~2.00-2.25" higher than stock up front with the 3" collar. I do a lot of 4H use when on runs, lotta jumping and G outs, no cases of CV/torsen binding issues at this height. Ideally id like to get slightly more height up front, but the 3" collars are really a perfect match for these leafs.
This is the feedback I was looking for. Stellar my friend, by chance you have a picture? I dislike the soft factory front and donkey kicking ass end. I plan to run 2 spares in the bed. I didn't want the front to get over stiff. So much easier with adjustable coil overs. SVC has a good concept but alot of money when I plan to upgrade the coil overs next year anyway. I worked with RPG today and landed on 3" front, 3" rear and fame support bump kit. Next year I will move to RST rear and Bolt front with fenders and bedsides. Ill play with 37's to check fit and stay with 35's if need be.
 

benbachh

Full Access Member
Joined
Mar 28, 2017
Posts
163
Reaction score
145
Location
orange county
I have the 3.5 rpg, thinking of doing the +3 deavers, do you guys think i'd be ass high ? Main reason for me to get the deavers is because my rear tire is destroying my fender every time i hit a bump...
 

xrocket21

FRF Addict
Joined
Jan 16, 2017
Posts
2,521
Reaction score
1,916
Location
Maine
I have the 3.5 rpg, thinking of doing the +3 deavers, do you guys think i'd be ass high ? Main reason for me to get the deavers is because my rear tire is destroying my fender every time i hit a bump...

yes, I am ass high with +3s and 2.25" front collars.

level would be 2.25" collars and +2's, or 2.25" collars and +3's with 1" drop shackles, or 3" collars with +3's.
 

murph145

Full Access Member
Joined
Sep 7, 2017
Posts
459
Reaction score
171
Location
Simi Valley, CA
I have the 3.5 rpg, thinking of doing the +3 deavers, do you guys think i'd be ass high ? Main reason for me to get the deavers is because my rear tire is destroying my fender every time i hit a bump...

Just get some +3's you will be level.... I am exactly level with Geiser springs and Deaver +3's
 

Forum statistics

Threads
95,793
Posts
2,017,257
Members
59,476
Latest member
egermann
Top