40" behind the grill mounts.

[ossachuk]

Hey guys. Just got my light bar. I was preparing to install the mounts when I realized they don't fit. The bumpers for the grill seem to be in the way. Is there anything I can do or do I need to order different mounts?

Sent from my iPhone using Tapatalk

 

[tahitiansoul]

L-shape mounts worked for me

 

[raptor36]

Plasti dip fixes everything.

 

[Backinblack]

I had the same issue exactly. Put the bracket in a vice and grind the edge of it off. Probably take off 3/8 " or so. Hit the raw metal with some black paint and your good to go. If all else fails, buy the brackets from Rigid. I would also replace that ****** torx screw with a stainless bolt, you can get nut and washers below no problem.

 

[ossachuk]

40" behind the grill mounts.

Thanks guys. I will be ordering the brackets from rigid. Can't wait to get this baby installed.


Sent from my iPhone using Tapatalk

 

[Tommysyko]

L bracket from ace hardware. The rigid mounts are nice but expensive


Sent from my iPhone using Tapatalk

 

[BajaTaxi]

Thanks guys. I will be ordering the brackets from rigid. Can't wait to get this baby installed.


Sent from my iPhone using Tapatalk

Pm me your address I have a set of rigid mounts I don't need. You pay shipping.


Sent from my iPhone using Tapatalk

 

[ossachuk]

Pm me your address I have a set of rigid mounts I don't need. You pay shipping.


Sent from my iPhone using Tapatalk

Damn! I already ordered them!! Oh well. I appreciate the gesture. Thanks again.


Sent from my iPhone using Tapatalk

 

[BajaTaxi]

I tried brother.


Sent from my iPhone using Tapatalk

 

[Yukon Joe]

I had the same issue exactly. Put the bracket in a vice and grind the edge of it off. Probably take off 3/8 " or so. Hit the raw metal with some black paint and your good to go. If all else fails, buy the brackets from Rigid. I would also replace that ****** torx screw with a stainless bolt, you can get nut and washers below no problem.

Second the replacement of the bolting hardware.

@Yukon Joe
www.runraptorrun.com