39 Performance Package ;)

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

OP
OP
cyclebum

cyclebum

Member
Joined
Feb 17, 2025
Posts
10
Reaction score
29
Location
12436
Bro I have to know… how’d this impact performance and how far off is your speedometer?
Honestly acceleration does not feel effected that much, the weight penalty was only about 7lbs or 8lbs per side since the wheels are much lighter than stock. Not sure how far off the speedo is but my Ford dealer said they would recalibrate it.
 

Evasive

FRF Supporting Member
Supporting Member
Joined
Oct 23, 2021
Posts
79
Reaction score
92
Location
FL
Looks sick. Post some pics of the work you did to get them on, if you have them. Cool look for sure.
 
OP
OP
cyclebum

cyclebum

Member
Joined
Feb 17, 2025
Posts
10
Reaction score
29
Location
12436
Some pics of the finder trimming. I don't have any of the V notch I cut on the bottom of the fender flare, but this needs to be done to pin the fender flare back to the pvc block that's attached after trimming the sheet metal near the pinch welds, and also the fiberglass quarter panel. If I could do it over again I wouldn't trim the fender liner at all. Not sure why I did that at the time but I could always buy 2 new ones and reinstall them.
 

Attachments

  • IMG_5320.JPEG
    IMG_5320.JPEG
    264.4 KB · Views: 18
  • IMG_5321.JPEG
    IMG_5321.JPEG
    334.1 KB · Views: 18
  • IMG_5322.JPEG
    IMG_5322.JPEG
    285.6 KB · Views: 18
  • IMG_5323.JPEG
    IMG_5323.JPEG
    371 KB · Views: 18
  • IMG_5324.JPEG
    IMG_5324.JPEG
    298.8 KB · Views: 18
Top