'24 Raptor Eibach Lift Kit and TSW Top Hats - Clunk Noise

[Sallyboy715]

Hello this is my first post to the forum and hoping for some help.

I have a 2024 Raptor and just installed the Eibach lift springs, TSW top hats and 37" tires. After driving the truck, I notice a very ANNOYING clunking popping noise coming from the front suspension. It happens over the tiniest road imperfections. It's a constant noise that makes me nervous to even drive the truck. I did some research but couldn't find anything involving the top hats. As far as the springs go it seems it may be sway bar end links? I was hoping maybe someone could help. Today is Saturday and the shop that installed it all is closed till Monday so I can't bring it back till then. Thanks for any help!

 

[hyrepower]

It’s the paint on the fender flares, you have to remove that!

 

[Sallyboy715]

It’s the paint on the fender flares, you have to remove that!

LOL. I was waiting for that or the 22" rims. I know...I know...

 

[HighwaySentinel]

Sounds like something didn't get tightened correctly.



Not touching the paint to match or 22's. To each their own.

 

[IIAWAH808]

Maybe check lower shock bolt torque. Think I read several people stating lower shock bolt/nut torque is around 406ftlbs. And if not torqued correctly causes clunk.

 

[Sallyboy715]

Maybe check lower shock bolt torque. Think I read several people stating lower the torque around 406ftlbs. And if not torqued correctly causes clunk.

Thank you! I’ll look into that.

 

[LordxEkim]

Get it sorted?

 

[jeffraptor]

Check your sway bar end links, if they are the slightest bit loose they clunk.

 

[Ox3721]

The problem is you put Raptor specific springs on a Lariat.