CDub
Active Member
I recently purchased a brand new 2020 Raptor Screw with the 802A package. When I picked it up with 42 miles on it the Lane departure system worked flawlessly it had all the appropriate alerts and colors and vibrations. I have all the sensitivity on normal and I just have it on the Alert function only with no aid. about a day ago I have noticed that the system doesn't vibrate my steering wheel when I get close to the lines, and the lane indicators do not illuminate any color now at all but still recognizes a vehicle in front of me. I am wondering if there is anything I can do without having to take it into Ford for service. Appreciate any info/help
Also just to point out, I was traveling over 40mph, I haven't had a new windshield installed and no mods on the truck, and the lines on the road are very definable, weather/sun isn't the issue since they are the same roads that I travel on a daily basis and the truck used to recognize them in the past. Have also cycled through all the options for the lane departure system just to see if the alert and aid function would do anything and it didn't, and finally I know that the system that recognizes a vehicle in front of me is a sensor system not the camera system.
Also just to point out, I was traveling over 40mph, I haven't had a new windshield installed and no mods on the truck, and the lines on the road are very definable, weather/sun isn't the issue since they are the same roads that I travel on a daily basis and the truck used to recognize them in the past. Have also cycled through all the options for the lane departure system just to see if the alert and aid function would do anything and it didn't, and finally I know that the system that recognizes a vehicle in front of me is a sensor system not the camera system.