2013 stock LEDs headlights on my 2011

[Raptor Retrofit]

Here is the conversion harness if you need a new one, be sure to remove the relay and apply dielectric grease to all the pins before installing, same with the input plug. https://www.theretrofitsource.com/c...150-oem-hid-conversion-2009.html#.V5AxsOT6vnY


This is the pigtail you need if the truck side input was ruined - http://www.rockauto.com/en/catalog/ford,2010,f-150,5.4l+v8,1444700,electrical-bulb+&+socket,headlamp+socket,4056?a=Referer+www.google.com+URL+%2F

 

[98infinity]

Here is the conversion harness if you need a new one, be sure to remove the relay and apply dielectric grease to all the pins before installing, same with the input plug. https://www.theretrofitsource.com/c...150-oem-hid-conversion-2009.html#.V5AxsOT6vnY


This is the pigtail you need if the truck side input was ruined - 2010 FORD F-150 5.4L V8 Headlamp Socket | RockAuto

Is it okay to leave hard wired?

 

[98infinity]

Here is the conversion harness if you need a new one, be sure to remove the relay and apply dielectric grease to all the pins before installing, same with the input plug. https://www.theretrofitsource.com/c...150-oem-hid-conversion-2009.html#.V5AxsOT6vnY


This is the pigtail you need if the truck side input was ruined - 2010 FORD F-150 5.4L V8 Headlamp Socket | RockAuto

Hey this has gone to hell again, don't have any lights now. The first link for theretrofitsource.com doesn't work. I'm thinking I need to replace the morimoto box and relay on the back of the box it says number 201407. I'm so confused

 

[NASSTY]

Hey this has gone to hell again, don't have any lights now. The first link for theretrofitsource.com doesn't work. I'm thinking I need to replace the morimoto box and relay on the back of the box it says number 201407. I'm so confused

Did you check the inline fuse? My inline fuse wasn't blown but kept getting wet and corroded and lost connection. I had to change the fuse and make the fuse holder water tight.

 

[98infinity]

Did you check the inline fuse? My inline fuse wasn't blown but kept getting wet and corroded and lost connection. I had to change the fuse and make the fuse holder water tight.

Checked everything. I just bought a new harness and everything. Hope I didn't blow the lights.

 

[tomahawk]

you need a relay harness or the light will flicker...I had this same problem