$10K for Mods

[nd1068]

I’ve got a 2021 Gen 3 with 12k miles.

Currently I’ve got a retrax bed cover and a Ravelco on it, other than that it’s stock.

I’ve got $10k for mods at the moment. What would you do??

 

[WTX]

IC, goosetunes, Baja Designs lights all over. After that you’ll have 3k left for tires.

 

[Littlefx4]

Nothing. Put that 10K into your house.

edit to add…buy Forscan adapter, make a few changes, then send me the rest.

 

[Luminarida]

Wrap it in stealth PPF or a better color

 

[Nick@Apollo-Optics]

It really all depends on what you want to do and what you'll enjoy the most. Are you more performance oriented, suspension oriented, or do you want bumpers and lights to finish off the look. If it were my truck, I'd do the following:

Raise it front/rear with Eibach springs: $798

Throw some new 17" wheels and 37s on it: ~$3000

• Here's a nice wheel that doesn't break the bank: https://apollo-optics.com/venomrex-vr-601bl-17-wheel-var-vr601bl/

COBB Stage 2 Kit with Intercooler: $1975-$2375 (depending on which intercooler you go with)

• You can view options here: https://apollo-optics.com/cobb-stage-2-power-package-ford-f-150-raptor-2021-2022-var-for010stg2/

ADD Front Bumper w/ Lighting: $3800 (depending on bumper and lighting choice, but that's a rough number)

• My personal favorite for the Gen 3 is the new Phantom: https://apollo-optics.com/2021-2023-ford-f-150-raptor-phantom-front-bumper-f210263200103/

All that comes in at just under $10k.

All that done and it will look, drive, and feel like a completely different truck.

And we carry everything mentioned above here at Apollo. Happy to help with anything you need! Feel free to send me a PM if we can assist.

 

[nd1068]

Nothing. Put that 10K into your house.

edit to add…buy Forscan adapter, make a few changes, then send me the rest.

This made me laugh! That’s what the wife says lol

 

[downforce137]

wheels with a better offset like method or icon, m/t tires, xl80s on the pillar, whatever baja designs has for behind the grill, VHF/UHF radio, GJ chase light, eibach coils, i think you'd be set up pretty nicely.

just noticed its a 37PP, so i'd probably just do a 3/4inch wheel spacer because those are the best looking wheels out there, but they are tucked in the fender a bit much...

 

[nd1068]

wheels with a better offset like method or icon, m/t tires, xl80s on the pillar, whatever baja designs has for behind the grill, VHF/UHF radio, GJ chase light, eibach coils, i think you'd be set up pretty nicely.

just noticed its a 37PP, so i'd probably just do a 3/4inch wheel spacer because those are the best looking wheels out there, but they are tucked in the fender a bit much...

It’s actually 35, just has the 37pp wheels

 

[BaseModelRaptor]

Nothing. Put that 10K into your house.

edit to add…buy Forscan adapter, make a few changes, then send me the rest.

EDITED to be more warm and fuzzy.

I’m with this guy.

 

[rlj676]

I’m with this guy. If your truck and house aren’t paid off you don’t have $10k for mods.

So pay off a mortgage at 2.75 % interest or similar above all other priorities? Glad this isn’t a serious financial advice forum…