Search results

  1. 2

    IC Shutters

    I did not monitor fans so I can't give you anything on that. I can't imagine them opening when the shutters are closed or when there is decent speed going on. I didn't really notice a difference with ambient temps
  2. 2

    IC Shutters

    Doing a little data logging, for curiosity and a comparison for when I do the cobb front mount, the shutters in front of the intercooler only seem to open under a good load (pulling long hills, no towing log yet) and when the charge temp starts getting around 120-130F area. Sometimes they will...
  3. 2

    Front diff cover mod.

    Do you think you could put that cover on with pulling the housing or the rack? Haven't tried yet, but looks tight
  4. 2

    Dead pedal?

    Got around to pulling some trim off today. This was done in a 18 raptor, so I have the mechanical parking brake. Uses the lower parking brake pedal bracket bolt to sandwich the dead pedal to the side of the truck and 2 rivnuts to hold it to the floor. It does give you a solid place to put...
  5. 2

    Dead pedal?

    Anybody install yet? Mine just arrived and a quick glance I don't see where any of the holes line up. Obviously I need to drill 2 holes for the nutserts
  6. 2

    Airlift new system installed. Love it

    They have raptor listed as its own model, not as a package of f150.
  7. 2

    Airlift new system installed. Love it

    Link?
  8. 2

    Airlift new system installed. Love it

    What kit is that or all custom? Haven't seen any raptor specific air bag kits for the gen 2 yet
  9. 2

    GEN 2 NYC/NJ Ford Dealer

    Not my truck. I just worked on it
  10. 2

    GEN 2 NYC/NJ Ford Dealer

    I just finished doing phasers on a truck today. Even if they look at the truck and confirm the noise, good luck getting parts. It took over a month of that truck sitting in the lot before parts showed up.
  11. 2

    Dead pedal?

    I emailed them and they said you had to drill 1 hole and put a nutsert in
  12. 2

    GEN 2 New lug nuts for non bead lock capable wheels?

    I have the beadlocks, but they use the same lugnut. I'm running these https://www.jegs.com/i/McGard/671/64074/10002/-1
  13. 2

    Dead pedal?

    Anybody install a dead pedal? I have a 18 so I still have the mechanical parking brake. Only one I've found so far is the evil manufacturing one, but haven't seen or heard about it yet. https://www.evilmanufacturing.com/dead-pedals/2016-2017-2018-ford-f150-raptor-dead-pedal-2019-2020
  14. 2

    Mishimoto R&D: 2017+ Raptor Catch Can

    Heat up the coupler to soften around the sensor (heat gun works well) and it will separate. There's enough slack in the harness to move the sensor. Mines been installed since November, no issues
  15. 2

    Mishimoto R&D: 2017+ Raptor Catch Can

    Look at the instructions! You put the crankcase pressure sensor in the wrong spot
  16. 2

    Turbo and manifold issues

    The bolts that hold the turbo to the manifold like to seize in from the factory. Sometimes heat helps, sometimes it doesn't. I've had a couple snap the bolt or pull the threads out. These have all been on gen1 Ecoboost motors, haven't done a turbo on a gen2 motor yet, but it's the same setup
  17. 2

    Mishimoto R&D: 2017+ Raptor Catch Can

    Is there a rough shipping date yet?
  18. 2

    GEN 2 No Trailer battery charging

    Close all the doors and leave your key inside the vehicle while it's running
  19. 2

    JDM Tuned Stock Exhaust Raptor Dips into the 13s!!!!!!!

    AFE hotside pipes? I haven't seen those for the gen2 yet
  20. 2

    GEN 2 2019 Oil Dip Stick Readings

    If you ever get the joy of tearing down one of these motors you'll find out there is no actual dipstick tube. The stick goes through the head into the pan. I follows the same path as the oil drain. Best bet is to let it sit for a while other wise you wind up catching oil as it drops back down...
  21. 2

    GEN 2 KHC Torque Arm, anyone running it?

    Any clearance issues with aftermarket diff covers and the skid plate
  22. 2

    Washboard Dirt Roads = Major Problems

    The early build 19s h(before November 15, 2018)a message about rough ride. Supposed to update the module that controls the shocks. Look up ssm 47757
  23. 2

    Misbuild Claim Process when buying Used...? Missing BLIS

    You think there would be warning lights on the dash with the bliss modules missing
  24. 2

    GEN 2 2019 Measurements (Gauges)

    Out of curiosity, how high does the oil temp get on yours? I have an 18 that doesn't have all the gauges and am planning on installing some autometer units. Just want to see what scale I should get
  25. 2

    GEN 2 Center Dashboard Gauge Consoles

    Contact Ortiz https://ortizcustompods.com/index.html It's not on their site, but I have messaged them about it. Email them and they'll get to you. I want it too, but need to save up funds for gauges first haha

Staff online

Members online

Total: 2,013 (members: 39, guests: 1,974)

Forum statistics

Threads
95,729
Posts
2,015,808
Members
59,405
Latest member
cdawson14
Top