Search results

Hi, can you please provide prices for the new Midnight Lightbars. Thanks.

I couldn't get the little Aluminum bracket supplied to line up with the mounting hole, maybe because of the orientation, or maybe as there were a couple of different holes on the OEM unit and only one on the IC. But it was a simple 5 minute exercise to create one that fitted. I run standard...

Sure, There you go! I painted my Intercooler front face to make it disappear but you can see where the BOV sits. As per my original comments on install it goes in fine, but better done before mounting the IC as the BOV needs to be rotated in the bayonet fitting which you cant do with the IC...

I painted some of these and put them on my truck about a year ago. I went with the Orange Accent to match the rest of the Trucks orange that includes the interior accent package (2018). If you are going to paint them I would advise you use a decent primer as well as prep the surface. But...

I fitted the New TS EM BOV (This is the electro-mechanical unit that is a direct replacement for the OEM unit and is plug and play). I just realized this thread started a long time ago and was originally referencing the old Mechanical Vacuum operated BOV. (Not sure why anyone would want to fit...

What Issues? There is absolutely nothing wrong with the TS BOV, nothing for them to fix.. I installed it on my SVC IC some time ago and it has worked flawlessly.

The 20% off coupons seem worthless, if you look at whats excluded it covers pretty much anything worth buying at HF including any Daytona Jack.

I installed one on my truck a couple of weeks back. I have SVC FMIC with the BOV mounted on the side of the IC. Fitting required that I pull the front grill off to gain access, but once you have done it once its a 15 minute exercise. I had to remove the IC top mounts and loosen bottom hose to...

Instructions: https://830533.app.netsuite.com/core/media/media.nl?id=10737033&c=830533&h=3cc84f3ea960deaf68de&_xt=.pdf&fcts=20191211170419&whence=

I just made my own inside the center armrest. its a wireless phone charger setup that will fast charge my Samsung phone by just dropping it in place. It was real simple just a bit of closed cell foam with a bit of seaboard I had lying around cutout to hold the phone in place.

I am running about 36psi and they seem to ride pretty well at that.

I don't think you will go wrong with either. I went with SVC as i liked the fact the dump valve was relocated up on the side of the IC. I have been running it for the last year and 3 months with zero issues.

Thanks for the feedback all, yes I think I may check the Alternator/voltage regulator as I suspect that the output may be on the low side.

What is the expected charging circuit performance? Should it be able to top up/fully charge the battery in a daily driven truck that has 30-40 min journey each way? So in other words battery is called upon for 2 starts a day + lights, fans Dashcam etc. and has approx 1-1 1/2 hours of...

I updated my 2018 802A at the weekend using USB stick. I updated it the way I did last time, just downloaded the update copied it to USB then put it in the truck and go for a drive around the block. 3 minutes after setting off info bar at top of screen displayed stating updating system (all...

Thanks guys, Yes I will give them a call and see what they say.

I just fitted a retrax pro xr yesterday. whole thing went on well and seems to be pretty good quality components, but the finish just seems so inconsistent. anyone else have the same? the aluminum slats are clearly coated before assembly and it looks like the ones used on my cover were coated...

Any of the Vendors on here doing a good deal on the Retrax Pro xr? Looking to purchase today/tomorrow to take advantage of the Jet Stream bars offer. Thanks

Just what I needed! Perfect, thanks.

Has anyone got both on their truck? I have the builtright rack system and currently have the original Hard fold Tonneau, that I was considering upgrading to the Retrax Pro xr (especially as they have a deal on right now that includes some bars too). But when I look at how it mounts it looks...

Check out the tread I created on getting to to work with Cobb Tune, you can see the screen and where the option is. https://www.fordraptorforum.com/threads/auto-stop-start-after-cobb-ots-91-tune.65759/page-2#post-1326188

When I was debugging the reason for mine not working after a tune (Cobb now fixed it) I uncovered there are a lot of reasons for it to not work. As Smurf says, check the dash menu option and it will tell you why its not triggering. My bet will be battery is charging. If it is for that reason...

Satisfied Customer here. Been running the tune for a while now, truck is like i thought it should have been from the factory. Responsive and pulls right through the rev range. Questions always responded to quickly with relevant detailed answers.

Bit of a delay in getting back to this. I updated the Stage 1 map to the newer version that has the fix for the ASS. (I didnt actually realize that you had to update the map itself after a FW update on the AP until I read that on the Cobb site at the weekend). Since update, i see all of the...

I just made my own in the center console in my 2018. https://www.fordraptorforum.com/threads/center-console-tray.51659/page-3#post-1273055 Works perfectly and is a QI fast charger. It will charge the phone fully from flat in under an hour. I use an old Samsung S7 Edge in a case with no...