Search results

Thanks Smurfslayer. I am pretty certain the problem is that the amp needed a signal to turn on either through a remote wire or using a line out converter. For some reason I was thinking the high level inputs would do this. I was using the Rockford Fosgate 500 somethin or another amp. Most of the...

So i decided to tackle my sub upgrade this weekend and took my time wiring everything. Connected it all up and my amp wont turn on. My power cable is good and the inline fuse is still intact. For my ground I used ground spot on the drivers side of wall of the rear cab. There is a group of wires...

I've never understood the videos that hate on our exhaust note...sure if you only compare to a V8 it does sound worse. Overall though it sounds great in stock form.

I was waiting for a comment like that....Yes I am certainly not using my truck to its full potential, and for that reason I prefer carpet mats!

Outside of winter I prefer carpeted mats for ease cleaning/looks. The stock mats show dirt the minute after they are cleaned and I have to remove them to clean. Curious if anyone else is running carpeted mats, I am looking for options.

Its not just Method...RRW rusted for me exactly like that...they probably use the same hardware.

I am replacing my B&O sub with an aftermarket one and have been told its extremely simple with a Digikey adapter...does anyone know the part number for it?

I wanted to post a review of NEOGARAGE for the community. For those that do not want the details they score a 10/10 in my opinion. About 2.5 weeks ago I ordered a set of Eibach Springs to level out my 18 Raptor with the plan for my usual garage to do the install. One day I am at my local...

I wanted to post a review of NEOGARAGE for the community. For those that do not want the details they score a 10/10 in my opinion. About 2.5 weeks ago I ordered a set of Eibach Springs to level out my 18 Raptor with the plan for my usual garage to do the install. One day I am at my local...

No issues here and wouldnt order it without it...I'll trust Ford did their homework on this one.

Really, thanks Chris! I was under the impression from other threads that there was another piece you had to buy, but maybe thats if you remove the B&O amp...sounds like in your scenario you dont have to.

How are you guys hooking these up on the 18s...I know it isnt as easy and rip and replace like it was on the 17s with a Sony system. I'd love to upgrade my sub overstock, nothing too crazy, just a bit more thump...already poly filled and wrapped the stock enclosure in dynamat.

happened to mine. depending on when yours was built there is a software update for the trans. They updated mine last oil change and it all went away. Been perfect ever since.

Got the update on my 18....huge difference. It used to slam into drive and all that has gone away. Overall the transmission is behaving much better.

Love this look...well done!

Quick update. Finally had time to get the truck in and they said there was a transmission software update available. Since then all the previous issues have gone away. No more harshness in shifts and when going into drive. Will keep everyone updated if reverts back at any point.

Great info guys. Been traveling so I havent had time to get it in yet

I love the all the new gauge information you can display...I think that is a nice upgrade no one is really talking about.

Was just watching this video and noticed the new gauge setup in the 19. Havent read anytning about that change but would love to learn more 3:58 mark and then again at 4:07.

Have an 18 with just about 14k miles on it. Over the last few thousand miles I noticed when I put the truck in drive it almost likes bangs into gear and the truck lurches forward quite hard. It does it when the truck is cold or warm so I know that's not the issue. Plan on taking to the dealer...

Unplug the tube from the bottom of the airbox. You have to remove the access panel on the skid plate. Plug the tube with this and you are good to go. There are a number of DIYs on youtube showing it. https://www.homedepot.com/p/Everbilt-1-in-Black-Rubber-Leg-Tips-4-per-Pack-49128/203661031

I did the chair leg cover as someone mentioned. Cost $2 have had it for 8 months, no issues and sounds great.

I run 00 offset but rub at full lock in the front. RRW 17" on stock tires...

Definitely have to readjust the houses. I had to play with them for awhile as well to get them into a place where I didnt have to remove the foam cover each time. Part of the issue was the houses, the other was making sure to reposition the wires as described in the directions.

Yep agree with you. Decided to go this route versus the $400 one others are using and it works great, just as advertised.