Search results

the gen2s suffer from more electrical-related issues more than anything. you will want to at least bring a "plug" for the driver's side front axle shaft. If you break or damage it and it needs to be removed, all of the differential fluid will leak out if you don't have a plug. I would also...

based on the opinion of the ford "insiders" that I have spoken to, I would be 150% shocked if they offered the 5.2 cpc in a raptor.

I just throw the 40s on for pictures to impress people sometimes. :favorites37: ( sarcasm received.)

:poker: :upyours:

i disagree with the "baddest raptor" label. :rolleyes:

"he went more insane than me" might be more appropriate. ;)

there is a big difference in offroad performance. (for the better). On-road, you realistically won't notice a big difference. If you look at the EXO footage from past runs, Almost all of the "Crew" trucks run Icon suspension, icon wheels and 37s. If you consider that the EXO crew trucks...

eff that. If its under 20K, buy it. Cage, short course rear suspension, mid-travel, fenders/bedsides, 39s or 40s. Sell the stock parts. ( which should net you around 5-6K ) Bonus money for yanking the EB, selling it, and swapping in a coyote. (should be able to get 8-9K for the engine/trans...

isn't the center speaker what the nav audio plays through? I thought the system drops the volume on all speakers and the Nav system only uses the center?

stop worrying. Pull the liners, Trim the honeycomb structure and clearance the fender support gussets until you have no rubbing. Put the liners back in. Use a heatgun to recontour them so they hug the newly clearanced under structure. No one will know that you ever changed anything and...

The Mid-travel kit that is on my truck is one of, if not the first Gen2 kit that SVC produced. It is different in a few ways from what they are selling now. It took TMX, SVC and myself a bit of time and massaging to get it working right. My shock package and setup is also different than the...

i use VP dump cans and SDHQ makes dump can-specific tie downs that I use to keep them in place. I generally use one strap, with two cans back to back, with the tall sides touching. Evil MFG makes a spendy dump can holder that is really nice. I just haven't been annoyed with my SDHQ ratchet...

It should be sealed tightly with the sensor perpendicular to airflow ( "wide" side allowing air to pass through.) If the blue diode in the middle is touching the plastic, it should be replaced. You can try using some compressed air to clean it off. You would not necessarily see a dtc other...

check the intake sensor in the tube ( the closest to the air filter). the message that you're getting is for low boost pressure. Either you have a leak in your tubing, or the sensor is bad. Ive seen the sensor/wires severed, but not all the way on a jb4 setup. The jb4s are terrible. They...

the Mckinney shop mainly focuses on line-x. The north dallas/ farmer's branch location is where the magic happens.

the raybestos clutches and a beefier torque convertor has been holding quite a few 850-1250hp drag cars. not a ton of trans options for the EB bolt pattern.

the clutch upgrade that raybestos makes for the mustangs also works on the raptor trans. Don't have much more to offer than that, unfortunately.

If you check out expedition x offroad's youtube channel, you'll see my truck in the videos from the last year and a half. I know a few folks got some video on the last trip. When I see it, I'll share it.

ford sells the rings that convert the wheels into legitimate beadlocks as "offroad use only" . Going to the end of that " are beadlocks legal on-road" conversation is a black hole. Legal or not, having to retorque all of those bolts, every 500 miles , is a point of maintenance that I have...

I use semi-truck 12 ton tall jackstands. I waited until jeg's had them on sale for $180. They are the only way, short of a lift, to get my truck ( 40s and midtravel) off the ground completely.

Welcome! Let's see some pics! I've met quite a few ex-doorkickers with raptors. you're in good company!

I removed it when we cut the bed floor out and sunk the spare tires down. My truck is 100% fun-oriented and does not get used on the street unless I'm on a run that requires pavement driving. I wanted to still be able to see out of the back window with 2 x 40" spares on the truck. I also wanted...

either that or since you only drive on the street ( and don't seem to have any complaints about the ride quality), maybe look into some airbags with daystar cradles. If you do end up offroading it, or needing to pull the sand car out from a stuck, the cradles allow the airbags to "float" at...

i have a 2018 tailgate ( complete) with step that has been sittin in my garage for a year. I find it funny that even with the tailgates being so expensive, I havent been able to find a taker for it, even though it is complete and I will take $1000 obo. I went through pricing all of the...

yes! hit the link in the first post. It will take you to the registration page where you can pay the deposit.