Raptor Air Oil Catch Can

Dv8tor · Jun 11, 2013

Twin JTL's

SVT_4X4 · Jun 13, 2013

UPR Products Dual Breathers

I have about 800 miles on my UPR Products dual install. This is on a ProCharged Raptor and I mounted these on the firewall. It worked out well because I removed the cowl plastic covers and actually bolted these in from that area. Instead of using the plastic fittings that came with these, I ordered aluminum AN fittings and push on rubber breather hose. I then welded two bungs on the air inlet tube to the Supercharger and attached each breather to these. So far no oil in passenger side, and good amount of oil / mix in drivers side, see below pictures. I kept hearing people say you did not need the passenger side, but wanted to make sure this engine could breath, but it looks like it may have not been needed. But it is on, and will stay there.

J_dWbMnA453Y8yWk0UvYaLH3dBSlIwnnywU=w293-h198-p-no.jpg

F30KRmF-a3M1f6a1QSJpSYM8VhIxmNQW2rw=w265-h198-p-no.jpg

hmBckoxlpz2maDB79SuemCQlu3csaPOIgUA=w273-h203-p-no.jpg

JZJDh35N0O7HZVdrZyCunHQ6frR_FVk4Ikw=w272-h203-p-no.jpg

7jeYewKf3Zv2cnIxqfJ4ezrbicxYTnoP-n4=w265-h198-p-no.jpg

Dv8tor · Jun 13, 2013

No it's the other way around. I'm NA for now. Passenger side is collecting but drivers side is dry. Thats weird that its totally opposite for Forced Induction. O well. I'm no engineer. I think it's good insurance to have these catch cans. I'm going to keep my dual setup plumbed just in case.

Jay.gordon · Jun 14, 2013

Take a look at this thread too.
http://www.fordraptorforum.com/f24/jlt-oil-separator-23316/

NJStangersJonathan · Oct 9, 2013

any idea where I can get the moroso catch can? I checked their website and it wasn't exactly easy to navigate. I checked Summit Racing and UPR Products but nothing.

NickPic83 · Oct 9, 2013

Lethal performance is where I got mine.

Sent from my XT1080 using Tapatalk 4

Scrap man · Oct 9, 2013

you can get the moroso from summit racing that's where I got mine from it only took about 4 days till I received it. it was easy to install and I think the fact that it has its own stand is a big plus over the other systems out I can post some pics later if you would like

NickPic83 · Oct 9, 2013

I prefer it having a bracket too.

Sent from my XT1080 using Tapatalk 4

metronyc · Oct 9, 2013

you can get it from summit ricing with the bracket and free shipping for $159.97. Mfr part #85492.

MTF · Oct 9, 2013

Scrap man said:
you can get the moroso from summit racing that's where I got mine from it only took about 4 days till I received it. it was easy to install and I think the fact that it has its own stand is a big plus over the other systems out I can post some pics later if you would like

Did you have to modify the bracket to fit around the wiring harness?

I had to cut an inch off the side of the bracket, Moroso is looking into it but this might be just 2010 specific.

Raptor Air Oil Catch Can

Dv8tor

FRF Addict

Attachments

SVT_4X4

Full Access Member

Dv8tor

FRF Addict

Jay.gordon

Full Access Member

NJStangersJonathan

Full Access Member

NickPic83

FRF Addict

Scrap man

Full Access Member

NickPic83

FRF Addict

metronyc

Full Access Member

MTF

FRF Addict

Similar threads

Staff online

Members online

Forum statistics

Latest posts