Getting a new 2019 802a SCREW. I have a RCI bedrack for my Tacoma that can easily be modified to fit this new truck. Would the weight of the rack in the back help any of the rear end issues off-road? I want to wait before making any modifications. Not looking for huge improvement, just curious if better than a kick in the teeth.
Will weight of a bed rack help back end issues?
- Thread starter tacomoth
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Loufish
FRF Addict
Everything helps....
GCATX
King Dingaling
Which rear end issues off-road?
TurboTJ
Full Access Member
I’ve never heard of any
I've heard about some of the rear steer issues with the opposed shock setup but a rack aint helping that. I don't know what issues the rack could fix??
Winchester30
FRF Addict
I have a full 175# cap on the bed of my truck, rear end still hops.
Will likely put Deavers on next year.
Will likely put Deavers on next year.
ok thanks. I guess that's what I meant - it being skittish with some turns. Was just wondering if some weight in the back would help.
GCATX
King Dingaling
Drop tire pressure to 32 in the rear for street, lower than that for offroad, if 32 is not suitable.
alcoolaid
Active Member
Same experience here. Rack and roof top tent total 200lb rear still jumps around on loose roads at higher speeds. Adding weight won’t help in my opinion. Think it’s a combination of the stock leafs and stock shocks. Will upgrade to deavers like the gentleman above me mentioned. Then may upgrade shocks.
waveslayer
Full Access Member
It is an easy fix... get Deavers and problem solved
My wife thinks I only have 3 guns
My wife thinks I only have 3 guns
Similar threads
