Will 39's fit without mod?

[CoronaRaptor]

I’ve put Nitto ridge grappler 38x12.5 on my 2021 raptor. A little rubbing when bottoming out the rear end. Tight fit but otherwise works. Haven’t figured out if I’m going to trim some, do a small lift or go back to 37’s…

Spare does not fit under the truck anymore..,

Welcome to the place. Pics or you did it to your Prius.

 

[wweaver]

So it bottomed out in the rear but front clears ? I was wondering how the front would do with real 37s, Toyo, Nitto etc let alone 38s. Flex that thing and post pics!!!!

 

[robopop]

 

[wweaver]

What about the front wheels turned when the tire gets pushed up into the fender, that is always the ultimate test other than a little hop over some railroad tracks of course. Find a steep driveway of something. Those tires look awesome by the way!!

 

[robopop]

I'm going to test this weekend.

 

[wweaver]

So I looked up the specs on those Nitto tires. They are one of 2 Radial tires in 38 12.50 17. The other tire is a Patagonia M/T not nearly the quality as a Nitto. They weigh 81 pounds ( 6 ply c rated ) which is very good for a 38. Most E Rated 35 Inch mid tires weigh that much. If these clear with off-road Suspension travel they will be a great option for the 37 pack trucks to go bigger stock.

 

[sethwright777]

And then there was 39s… man it looks good. Wonder how it functions

 

[robopop]

FWIW - I switched back to the Nitto RG 37" from the 38". The 38" was rubbing on the rear and didn't fit in the wheel well space. Rather than cutting a bunch of stuff to make it all fit, I decided the extra 1" wasn't worth it.

 

[Pokey]

I have an '18 scab w/37's. I have a little rub on the inside front of the tire on the edge of the tread. I am a bit careful in the dirt, but not too overly concerned.

 

[asteele711]

I posted in the suspension thread but felt that the 37 Nitto RGs made the truck feel to sluggish, switched back to stock size.