Which to choose? A Replacement/Upgrade guide to Fog Lights for your Gen 3 Raptor…

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

OP
OP
Specialtyperformanceparts

Specialtyperformanceparts

Supporting Vendor
Supporting Vendor
Joined
Jul 15, 2017
Posts
1,262
Reaction score
1,201
This is a great write up and helpful as I am in the process of figuring out what I want to do with my fogs. The "Rigids" suck. Do I go 3 pods or 2 half pods to retain the somewhat OEM look. Ran 2 Diode Dynamics SSC2 pods on my Ram with amber backlighting and really liked the output.

Thanks!
I DM'd you on IG. Last I checked, it looked like your followers were leaning toward the triple fog setup in your poll, but I completely understand wanting to maintain that OEM look.
Please let me know if you have any other questions I can answer for you. You can call or text me at the number below.

Thanks!
Sidney @ SPV Parts
(317) 934-6778
[email protected]
 

Waterfowler41

Full Access Member
Joined
Apr 2, 2024
Posts
139
Reaction score
306
Location
Illinois
I DM'd you on IG. Last I checked, it looked like your followers were leaning toward the triple fog setup in your poll, but I completely understand wanting to maintain that OEM look.
Please let me know if you have any other questions I can answer for you. You can call or text me at the number below.

Thanks!
Sidney @ SPV Parts
(317) 934-6778
[email protected]
Thanks so much for reaching out Sidney, the dual SSC2 edged out the triple pods by a very slim margin so that'll most likley be the route I go at some point here.

Thanks again for all the info you shared!
 
OP
OP
Specialtyperformanceparts

Specialtyperformanceparts

Supporting Vendor
Supporting Vendor
Joined
Jul 15, 2017
Posts
1,262
Reaction score
1,201
Thanks so much for reaching out Sidney, the dual SSC2 edged out the triple pods by a very slim margin so that'll most likley be the route I go at some point here.

Thanks again for all the info you shared!
My pleasure! I'm always happy to help.
Please let me know if you have any other questions or need help with anything else.

Thanks!
Sidney @ SPV Parts
(317) 934-6778
[email protected]
 

tone228

Full Access Member
Joined
Jul 8, 2016
Posts
118
Reaction score
85
I have 2 pairs of BD Squadron Pros from my old truck that I plan on installing on my new Gen 3. I ordered 2 pairs of OEM to 2 pole WP that you sell. That should work with the OEM fog light switch and AUX 1 without having to run anything else or am I missing something?
 
OP
OP
Specialtyperformanceparts

Specialtyperformanceparts

Supporting Vendor
Supporting Vendor
Joined
Jul 15, 2017
Posts
1,262
Reaction score
1,201
I have 2 pairs of BD Squadron Pros from my old truck that I plan on installing on my new Gen 3. I ordered 2 pairs of OEM to 2 pole WP that you sell. That should work with the OEM fog light switch and AUX 1 without having to run anything else or am I missing something?
Wiring-wise, yes, those will work. However, did you get a new set of brackets to install them in the fog pocket? Because the Squadrons won't fit within the OEM housings.

Feel free to call or text me directly at the number below if you'd like, as well.

Thanks!
Sidney @ SPV Parts
(317) 934-6778
[email protected]
 

tone228

Full Access Member
Joined
Jul 8, 2016
Posts
118
Reaction score
85
Wiring-wise, yes, those will work. However, did you get a new set of brackets to install them in the fog pocket? Because the Squadrons won't fit within the OEM housings.

Feel free to call or text me directly at the number below if you'd like, as well.

Thanks!
Sidney @ SPV Parts
(317) 934-6778
[email protected]
Yes, I did order brackets as well. Thank you
 
Top