Which fuse to use with "add a fuse"?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Frank N

FRF Addict
Joined
Apr 15, 2017
Posts
4,634
Reaction score
15,667
Location
NJ and Outerbanks
Grumble:

Thank you for this. I couldn't find a on/off in the 2018. Is that a spare/acc fuse or does it go with another truck electrical component?

Again, thanks

18 owners manual

36
15A
360 camera module.
Heated steering wheel module.
Rear-view mirror.
Rear heated seats.
Lane departure warning module.
Automatic high beam module.
Image processing module A.
 

RaptorMaryland

Full Access Member
Joined
Dec 24, 2017
Posts
739
Reaction score
357
Location
Maryland

WH7

Full Access Member
Joined
Jan 5, 2019
Posts
115
Reaction score
91
Location
Texas
Add a Circuit should have been a easy job, but no, ford f150 has tight fitting slots in the fuse box.

I tried this fuse, and if I cut the black ridge off, it now slides in.

https://www.amazon.com/gp/product/B00OZGA8O8/?tag=fordraptorforum-20

A better tap a fuse is this one,
Bussmann BP/HHTR-RP ATR Add-A-Line Circuit For Accessory


https://www.amazon.com/dp/B01M7RI5D6/?tag=fordraptorforum-20

I just wired my camera yesterday. I can confirm fuse 36 is accessory (on and off with ignition)
and I can confirm that the "better fuse tap" mentioned above works perfectly. Thanks for all
you guys input. Makes life easier for the rest of us.
 

Superman750

Full Access Member
Joined
Sep 27, 2015
Posts
28
Reaction score
6
Add a Circuit should have been a easy job, but no, ford f150 has tight fitting slots in the fuse box.

I tried this fuse, and if I cut the black ridge off, it now slides in.

https://www.amazon.com/gp/product/B00OZGA8O8/?tag=fordraptorforum-20

A better tap a fuse is this one,
Bussmann BP/HHTR-RP ATR Add-A-Line Circuit For Accessory


https://www.amazon.com/dp/B01M7RI5D6/?tag=fordraptorforum-20


This may seem like a stupid question, but do you put a fuse in both of the slots on that Bussmann add-a-circuit? If so, what size fuse did you use?

I tried getting power to my Papago camera through hardwiring it to the fuse box and for some reason it blocks the signal from the TPMS to the body control module. I then tried using just a regular shielded usb cable and am having the same issue. Essentially, if I have the camera powered on, I will get a code saying the TPMS is malfunctioning.
 
Last edited:

BHook

Full Access Member
Joined
Dec 7, 2018
Posts
106
Reaction score
51
Location
36351
One of the 2 fuse slots is for the fuse you removed to protect the original circuit, the other fuse slot is to protect the circuit you are adding (wire attached to fuse tap).

I have no idea about your TPMS malfunction, other than maybe your camera(s) are emitting interference.

You could try powering the cameras with a separate (not truck) power source to see if the TPMS still malfunctions.
 

Superman750

Full Access Member
Joined
Sep 27, 2015
Posts
28
Reaction score
6
That makes sense. Thanks for the explanation.

Trying to power it from another source is a great idea. I’ll have to give that a shot.
 

SPH1185

Member
Joined
Apr 21, 2020
Posts
2
Reaction score
0
Location
Los Angeles, CA
Does anyone know which fuses in passenger fuse box are constant hot and ignition only specifically for a 2020 Ford Raptor 802A? I can find maps like the links below, but nothing tells me what’s hot and not when car is on and off. Thanks.


Or

 
Top