Wheels and tire setup and why

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

OP
OP
Phil O

Phil O

Full Access Member
Joined
Jan 10, 2020
Posts
203
Reaction score
97
Location
Sacramento, Ca
I just put them on this past summer, so they only have a few thousand miles on them so far. Road noise is a little more than stock, handling is just as good as OEM, MPG is the same. Too early to tell on life expectancy, but I typically wear my tires out off-roading well before they wear to street use.
Only a few thousand miles since last summer? I put on 11k miles since August Hahaa.

how are the 3.0’s compared to the stock live valve shocks?
 

Big Blue

Administrator
Staff member
Admin
Supporting Member
Joined
Aug 1, 2011
Posts
4,273
Reaction score
7,598
Location
USA
Only a few thousand miles since last summer? I put on 11k miles since August Hahaa.

how are the 3.0’s compared to the stock live valve shocks?


I've got an 18, so no live values here. 19 and 20 only.
 
OP
OP
Phil O

Phil O

Full Access Member
Joined
Jan 10, 2020
Posts
203
Reaction score
97
Location
Sacramento, Ca
I am running Black Rhino Roku wheels in bronze and 37" Cooper Discoverer SSTs. I had black Methods on my Gen 1 and wanted to change things up. As far as tires, I have run them all. My favorite 35" Tire was the Toyo Open Country M/T, it's indestructible but it's also heavy. When I up sized to 37's I knew rotating mass is a bad thing for performance, so no Toyo this time. After an extensive search, I opted for the Cooper Discoverer SSTs and love them. Ironically, the 37" Coppers are 1 lb lighter per tire than my 35" Toyos.

View attachment 138677
Pulled the trigger today on Yokohama Geolandar G003 in a 35x12.5r17

3BC27628-51CD-468E-8C1D-D5C23B4C28EE.jpeg

6F48FB64-E25B-45A8-891F-99C1D6B4918F.jpeg

BB933406-5F60-4C7A-B4A4-6B9CEE46A531.jpeg
 

ljn21

FRF Addict
Joined
Nov 29, 2013
Posts
1,256
Reaction score
2,906
Location
Tega Cay, SC
OP
OP
Phil O

Phil O

Full Access Member
Joined
Jan 10, 2020
Posts
203
Reaction score
97
Location
Sacramento, Ca
Looks great. Can you measure the height of the tire mounted on the truck, use a level/straight edge to get the true top/center to the ground. Curious how they measure compared to specs and compared to stock BFGs.
I tried and it looks like it is just over 34” but I also need to have them aired up a little bit more. Think it’s at 34 psi right now. Not sure if that will make a difference?
 

ljn21

FRF Addict
Joined
Nov 29, 2013
Posts
1,256
Reaction score
2,906
Location
Tega Cay, SC
I tried and it looks like it is just over 34” but I also need to have them aired up a little bit more. Think it’s at 34 psi right now. Not sure if that will make a difference?

Thanks Phil O, I will measure my stock BFGs tomorrow but am anticipating he BFGs to be a half inch at least shorter. Yours Tokos are the 35x12.5 and not the 315/70 right?
 
OP
OP
Phil O

Phil O

Full Access Member
Joined
Jan 10, 2020
Posts
203
Reaction score
97
Location
Sacramento, Ca
Thanks Phil O, I will measure my stock BFGs tomorrow but am anticipating he BFGs to be a half inch at least shorter. Yours Tokos are the 35x12.5 and not the 315/70 right?
Correct, 35x12.5r17. I feel like the height is negligible. Too hard for the naked eye imo. But the aggressiveness of this tire just makes the stance so much better.
 
Top