Wheel well liners

[gobluejd]

I just sent Husky another email today and was told 4-6 weeks. I am tired of that figure being thrown out for months.

Odd. I did as well. They told me 2-3 weeks.

 

[ThankU45]

Just got my rear wheel wells lined at a local Rhino Linings shop. Pricey but they put a LOT of effort into the prep and I was pleased with the results.

 

[DMays]

I did my own with Raptor Liner. Super easy and is holding up really well. Really easy touch up if need be too. Some painters tape, trash bags, and elbow grease is all. Took me 1.5 hours total.

 

[ThankU45]

I did my own with Raptor Liner. Super easy and is holding up really well. Really easy touch up if need be too. Some painters tape, trash bags, and elbow grease is all. Took me 1.5 hours total. View attachment 358067

Very nice.

 

[TheMachinist]

I just sent Husky another email today and was told 4-6 weeks. I am tired of that figure being thrown out for months.

Funny, sounds a lot like my weekly ford performance chats.

 

[787Jet]

I did my own with Raptor Liner. Super easy and is holding up really well. Really easy touch up if need be too. Some painters tape, trash bags, and elbow grease is all. Took me 1.5 hours total. View attachment 358067

Assume you bought aerosol? How many cans do I need if I ever get a truck?

 

[LPZML]

I got rhino lining 125 to spray both

 

[DMays]

Assume you bought aerosol? How many cans do I need if I ever get a truck?

Yes I used the cans. I used two cans and I also used the adhesion promoter. With that adhesion promoter I used maybe 1/4 of the can at most. I applied one thin coat and two thicker coats. One can per wheel well should do it. Just make sure to tape up well and avoid a windy day. The stuff is pretty thick. One thing to mention is make sure you fully press the nozzle down when spraying. If you feather it a little it comes out runny. I had to wipe it off and start again but after I learned that it was super easy.

 

[Bullet Bob]

I've heard about drop-in bedliners trapping debris and water between the bed/liner causing rust, is this the case for plastic wheel liners as well, or is there enough airflow to keep things dry?

The bed and body are an aluminum & lithium alloy called "Al-Li". So rust isn't an issue. I installed the plastic liners on a 2017 Super Duty and they did great.

 

[Antho]

Gave up on husky.