What kind of suspension system should I put on my raptor.

[2014RubyRed]

 

[KaiserM715]

Don't listen to this type of nonsense! No one needs reason when buying mods! Just go get a CC with a $30,000 limit and throw whatever you can at it. If it doesn't work, trash it and start over!!

Like the Panamanian Shrimp Farm Prerunner

 

[ntm]

Like the Panamanian Shrimp Farm Prerunner

What a waste of a nice h&m kit...

 

[Tom]

If it was my rigs, I would swap out the raptors suspension with a 1072 Datson 620's suspension and call it a day. Trust me, everyone will marvel at what you've done. You can also try the Datson 720, since it's suspension components maybe a direct fit???? JK

 

[Baja Kits]

What EricM posted was actually very good.

It's good to know about your truck first.

But if you have any questions, please let me know!

JT

 

[ProjecT 9]

In houston I'd hit up GForce motorsports in Pearland for help and any modifications.

 

[Krutoy]

Don't listen to this type of nonsense! No one needs reason when buying mods! Just go get a CC with a $30,000 limit and throw whatever you can at it. If it doesn't work, trash it and start over!!

This is a great idea

 

[Bulletnjm]

Life's to short to die debt free, right?

 

[Krutoy]

Wow. You probably need to step back a bit, drive the truck as it sits for a while and learn about your truck before you start throwing thousands of dollars worth of modifications at it. Ford delivered a truck that is more capable than you.

Start with the basics. Learn what a control arm is. Get under your truck and look at the one Ford put on there. Figure out what control arm bushings are and what ball joints are. Google the terms "control arm" & "ball joint" and find them on your truck.

Next, learn what type of steering system your truck has. Get under your truck and look. Hint, it's a rack and pinion setup with two tie rods going out to the spindle- not a steering box with a bunch of linkages connecting it to the front wheels like most older trucks. Google the term "rack and pinion" & "steering rack" and then go find them on your truck. You should be able to deduce that you can't install a double shock steering stabilizer if you fully understand what you have.

Next, figure out what a spindle/knuckle is. Google the terms "steering knuckle" & "4WD spindle" then go find them on your truck. Figure out what a half shaft is and how it's connected to the spindle. Get under your truck and follow the half shafts inward and see how they connect to your front differential. Look at how the front differential is mounted and how the front drive shaft connects from the differential to the transfer case.

Read up on the 04+ F150 4WD system. Find out why IWEs suck ass. Find out why the '12 and up Raptors torsion diffs make the situation even worse. Google the term "torsion diff" and "open diff" and figure out the difference. Get under your truck and find the vacuum line to the hub. Protect that line or you'll be buying new IWEs soon.

Bottom line, you should take the time to understand the basics of your vehicle long before you start showering it in cash hoping for.. uh, what exactly? The coolest truck in your town?

Since you threw out the terms "leveled" and "lift" you clearly are on the wrong track. This is not a F250 that needs the full bro-dozer treatment. Aftermarket parts for a Raptor are very expensive and are targeted for a particular use.

I'm sure you'll ignore me and just buy whatever someone tells you to and pay someone to install it, but you'll be way better off learning what's what, determining what parts are best for your usage (hint probably keeping it stock is your best bet for quite a long time) and installing the parts yourself using the proper tools and methods. Yes, the tools needed to install the parts will cost as much as the parts, but you only need to buy the tools once.

This is a much better idea. First off, I appreciate the time and thought that went into this extremely well-written message. I wasn't planning on just going crazy on the truck without knowing anything. I was definitely going to do all the research first. i know that when I get the truck, I will first do a mid perch and then just leave it alone for a bit. I don't ever do anything without doing all the research first. The point I had when writing this message was to get some good names for brands. I know now that raptors should not have lift kits. Like I said I am going to mid perch first, probably change wheels and tires, then audio inside, then cutback, intake, and tune. After that, and only if its necessary because I know the raptor is amazing stock (now I know) I will only do something if I need it. And yes, I will probably just take it to a shop and have them outfit it with something crazy like a rpg stage 4+, but for now, I am going to take it slow and just do some more reading

 

[bstoner59]

Life's to short to die debt free, right?

They can have all the toys back after I'm dead [emoji23][emoji23][emoji23]