What did you do to your Raptor today? (Gen2)

[CecilK12]

What symptoms do you feel this fixed?

Definitely feel the difference going thru a corner. Not as much roll. Not as sloppy.

 

[JohnyPython]

What symptoms do you feel this fixed?

Rattle at slow speed from the end links.

 

[BBR]

Definitely feel the difference going thru a corner. Not as much roll. Not as sloppy.

Rattle at slow speed from the end links.

Thanks.
I’m at 111k and these are the only front end pieces that haven’t been touched. No rattle but feels like front end could be tighter.

 

[CecilK12]

Thanks.
I’m at 111k and these are the only front end pieces that haven’t been touched. No rattle but feels like front end could be tighter.

Truck feels a lot tighter.

 

[ThePaintPirate]

Installed the Cobb tuner over the weekend. Even though the truck was on a 15amp charger and lights off, after the flash was complete, on the initial start up the truck didn't want to start as if the battery was really low, negative was connected after the BMS sensor so the computer should've seen that it was charging. Second attempt, the truck started like normal and has started just fine ever since. Not sure what to make of that.

So far just the buttery smooth shifting makes it worth the price, but an additional plus is that the cam phaser rattle has all but disappeared. Before and after the dealer ECM update it sounded like a diesel for 0.5 seconds on start up. Now I can't hear anything.

 

[Lane2018]

What symptoms do you feel this fixed?

If it helps, I recently replaced mine as well. I would feel a “light clunk” when going over speed bumps/pot holes. Got under the truck and found driver side 90deg knuckle loose and worn out.

 

[JohnyPython]

Had my truck in storage for a couple months and finally installed my upgraded BD SAE fogs.

The cutoff at 15 ft is maybe 2ft off the ground. The spread is probably 18ish ft. They’re great for a fog light - low and wide beam.