What did you do to your Raptor today? (Gen2)

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

John813

FRF Addict
Joined
Feb 2, 2015
Posts
1,115
Reaction score
827
Location
PSL/Jupiter
Cooper at3 37s on
Feels a bit better than the 35s and just a slight rub on the frs reservoirs up front. Dont seem to notice the extra weight.
Gotta adjust the tire size in forscan, but balanced super well.

Also had mine stacked to some nittos or w/e in the same spec
No wonder you get such differing results on 37 threads
View attachment 473489View attachment 473490View attachment 473487View attachment 473488

Same tech that did yours did Jeff and my 37s right after lol.
Poor guy got stuck with all the heavy ass wheel-tire combos that morning
 

Space Ghost

Full Access Member
Joined
Apr 1, 2022
Posts
931
Reaction score
1,668
Location
FL
Cooper at3 37s on
Feels a bit better than the 35s and just a slight rub on the frs reservoirs up front. Dont seem to notice the extra weight.
Gotta adjust the tire size in forscan, but balanced super well.

Also had mine stacked to some nittos or w/e in the same spec
No wonder you get such differing results on 37 threads
View attachment 473489View attachment 473490View attachment 473487View attachment 473488
adjusted tire size, reset PCM and TCM
Still have a 422 DTC in the PCM but no wrench light anymore, everything appears to work ok.

Mileage def took a hit, but hwy speeds seem to be same or better so far. Was getting 16-17mpg at 1psi of boost goin 75 this morning
Under 60 it seems to be a bit lower which i guess makes sense. Acceleration and braking feel pretty close tbh, these are only 5lbs heavier a tire. Balanced crazy good, one tire has 0 weights, worst one has 6 ozs.
 
Joined
Mar 13, 2023
Posts
24
Reaction score
82
Location
Washington
If you had some time to drive around with this setup, how is it cabin noise driving around 80mph at 2k RPM for you?

It's a little "louder" than before. I'm guessing that is from the pre axle dump. No drone that I could distinguish anywhere in the rpm/mph range on the freeway. Before buying i have read the non Helmholtz mufflers had a pretty bad drone, so I think I'm safe.
 

Javi

Member
Joined
Feb 16, 2019
Posts
18
Reaction score
18
Location
Clarksville
I had my new updated cam phasers installed at 60K no more rattle. Also, had my spark plugs replaced.
 

Attachments

  • Screenshot 2024-11-15 at 8.09.37 PM.png
    Screenshot 2024-11-15 at 8.09.37 PM.png
    1.4 MB · Views: 5
Top