What did you do to your Raptor today? (Gen2)

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

MrT

Member
Joined
May 28, 2021
Posts
33
Reaction score
39
Location
Alabama
Might just be the angle, but it looks like you have a fair amount of rake there, even w/the drop shackles, MrT. Do you have measurements of the front and rear? I've been considering the Deavers' for when I'm able to do more trailering, but don't want too muck rake. Thx. Nice looking rig.
Alright after some driving around, carrying stufv in the bed etc I finally found a fairly flat parking lot(who knew that was so hard?) It looks like the back is only about 1/4" higher. I am glad I went with the +4's and drop shackles now. If they settle much more I can swap tge shackles back to stock. IMG_20210913_131946951_HDR.jpgIMG_20210913_132009323_HDR.jpgIMG_20210913_131908957_HDR.jpg
 

zemuron99

Full Access Member
Joined
Jan 23, 2018
Posts
384
Reaction score
382
Location
Seattle

Thx, MrT. The rake in these photos doesn't seem as pronounced as in your first set, so must have been some settling in, and the camera angle.

I've never been too partial to white vehicles, but that IS one fine looking ride.
 

Todd Turbo S

FRF Addict
Joined
Nov 28, 2012
Posts
1,015
Reaction score
1,510
Location
Nor Cal
Decided to tint the sunroof and all rear /back glass with 3M Crystaline. Did the windshield and passenger/drivers side when I initially purchased the Raptor, but it’s so damn expensive I didn’t do the entire truck, but it works so well
I decided to bite the bullet…went with 50%
 

Attachments

  • BF9CC7E2-F000-4565-B7E9-212671664E91.jpeg
    BF9CC7E2-F000-4565-B7E9-212671664E91.jpeg
    145.4 KB · Views: 49
  • 4224EF98-103E-4EFB-9F47-FEFB88C19894.jpeg
    4224EF98-103E-4EFB-9F47-FEFB88C19894.jpeg
    208.3 KB · Views: 51
  • F0AF1B1B-521C-4999-9C8F-F8535CE102AB.jpeg
    F0AF1B1B-521C-4999-9C8F-F8535CE102AB.jpeg
    174.9 KB · Views: 49
  • A2348194-9304-4B22-9938-69FC4CDDA1D8.jpeg
    A2348194-9304-4B22-9938-69FC4CDDA1D8.jpeg
    270.4 KB · Views: 49
  • 21F4875D-AC85-4920-A511-FDC534820DD5.jpeg
    21F4875D-AC85-4920-A511-FDC534820DD5.jpeg
    167.7 KB · Views: 49
Last edited:

Olsen Motorsports

Full Access Member
Joined
Mar 9, 2020
Posts
655
Reaction score
1,134
Location
Downers Grove, Illinois
D80E734E-8236-4470-810B-F7243D46F80C.jpeg

Can’t make this up :D:D

Dropped off a spare set of wheels and Nokian snows to get the bead locks mounted at the dealer. $672 paid the bill and they pulled up with this. Freaking hilarious. Needless to say they are fixing it. I couldn’t keep a straight face. Dude was like “yo that’s right the purpose of the bead lock is so if the bead pops off it hits that lip and doesn’t go any further”
 
Top