What did you do to your Raptor today? (Gen2)

[Russ103]

Just finished a Bakflip MX4 install

 

[K223]

Nothing special today but an oil and filter change. This valve should make future changes a lot quicker and cleaner!

 

[alphatwox]

Why light bar is that?

F150leds.com Paladin Curved Lightbar

 

[Denvertaco07]

Forscan updates:

Lincoln style mirror enabled
horn honk disabled
Engine Temp enabled
heated / cooled seat and heated wheel on home screen

 

[CobraJay]

Did an oil and filter change today as well as install a fumoto valve. Also did a rinseless wash and touched up with TW hybrid ceramic wet wax.

 

[Mbdurham]

I wasted $60 [emoji849] installed the rappy graphics Matte B pillars and then removed them. I liked the look but they were cut a little too long. I tried using a trim tool to put them slightly behind the window trim but couldn’t get them to fit right and the bottom kept bubbling out. Tried to pull them back up to cut them but it was too dry and stuck already. Maybe I was doing something wrong but IMHO these should be about 1/16” shorter.


Sent from my iPhone using Tapatalk Pro

 

[Russ103]

I wasted $60 [emoji849] installed the rappy graphics Matte B pillars and then removed them. I liked the look but they were cut a little too long. I tried using a trim tool to put them slightly behind the window trim but couldn’t get them to fit right and the bottom kept bubbling out. Tried to pull them back up to cut them but it was too dry and stuck already. Maybe I was doing something wrong but IMHO these should be about 1/16” shorter.


Sent from my iPhone using Tapatalk Pro

I wasted $40 from RappyGraphics on the sun visor stickers which are not cut big enough to cover the airbag warning stickers. Very disappointing.

 

[CHMP]

Changed putt the cabin air filter.
Also found a pleasant Easter egg.
Probably from the previous owner.

View attachment 139130 View attachment 139131 View attachment 139132

How many miles when you changed it? Fantastic quality filter catching that huge chunk of carbon, that would have hurt if it got into the cab.

 

[Bat]

I wasted $60 [emoji849] installed the rappy graphics Matte B pillars and then removed them. I liked the look but they were cut a little too long. I tried using a trim tool to put them slightly behind the window trim but couldn’t get them to fit right and the bottom kept bubbling out. Tried to pull them back up to cut them but it was too dry and stuck already. Maybe I was doing something wrong but IMHO these should be about 1/16” shorter.


Sent from my iPhone using Tapatalk Pro

I've had several issues with fitment with rappy graphics products. They don't seem to have very good quality controls in place. Have had better success with rocky mtn graphics products.

 

[Bat]

I wasted $40 from RappyGraphics on the sun visor stickers which are not cut big enough to cover the airbag warning stickers. Very disappointing.

Same here