What did you do to your Raptor today? (Gen2)

[JustRaptor1]

How much of a pain in the ass was it? I hear it's a nightmare.

My buddy helped me, he said it wasn't that bad. it would have been easier on a full lift. but took a few hours, all went smotth just took some time.

 

[GhostRHR]

She got a good bath, paint correction, Xpel Fusion ceramic coating and some XPEL PPF on the B-pillars, Headlights, Mirror Caps, and door edges.

 

[JustRaptor1]

She got a good bath, paint correction, Xpel Fusion ceramic coating and some XPEL PPF on the B-pillars, Headlights, Mirror Caps, and door edges.

View attachment 137478 View attachment 137479 View attachment 137480 View attachment 137481

Looks great what do they charge in your area for ceramic coating

 

[nikhsub1]

Put a new set of SP542s in. Old set still looked good but I wanted to see what they looked like. Had about 13k on them or so.

 

[Dachuri]

Installed a BBK 73MM Throttle body - and mounted my nGauge to the A-pillar.

What hardware did you use to mount the nGauge to the A-Pillar? I’ve been looking for other options than the windshield suction cup.

Also, from this image I can’t see the wire, looks clean. Do you have a picture of how your outed the wire to the OBDII?

Thanks

 

[nikhsub1]

What hardware did you use to mount the nGauge to the A-Pillar? I’ve been looking for other options than the windshield suction cup.

Also, from this image I can’t see the wire, looks clean. Do you have a picture of how your outed the wire to the OBDII?

Thanks

It's here in this thread - took me a while to find it

https://www.fordraptorforum.com/threads/ngauge-holder-for-2018-ford-raptor.71311/#post-1400092

 

[Donovan]

Forgot about this thread...
madness!

 

[dblack]

Looks great what do they charge in your area for ceramic coating

I had my truck coated with GTechniq Crystal Serum Ultra and the suspension and wheels coated with Shine Supply Beadlock Pro and it was $1700.

 

[GhostRHR]

Looks great what do they charge in your area for ceramic coating

so getting different quotes and which brand of ceramic coating you choose and what is offered i've seen prices range from the $1-2k range

I Have a business where i sell offroad truck and jeep parts and worked a deal with a local dealer to do some cross advertising and got a really good deal.

For the wash, paint correction, ceramic coating on all painted surfaces and wheels, as well as Xpel Ultimate on the B-pillars, mirror caps, door edges and headlights and i paid $1400.

 

[bailer]

35,700kms, 35months for my 2017.
Did the fifth oil change today.
Truck has never burned any oil.

Had a good look underneath, noticed my rear diff driveshaft seal is a bit more than damp. I guess I’ll have the dealer take a look at it.

I had been having trouble with my truck stumbling and backfiring when it was low rpm lugging. I had the transmission reprogrammed last summer which apparently has fixed the issue.

On a controversial note, while experiencing the stumble/backfire issue last summer, I had decided to drill the 1/16” weephole. At the time I got about 200cc of oily water out of it. I have left it open, thinking I would plug it, if necessary. The elbow stays oily, but not enough to drip or get anything else dirty, so my plan is to leave it as is. Pic as follows...