What did you do to your Raptor today? (Gen2)
- Thread starter Jepper
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Those are the Rigid Radiance Cube Lights which have Amber Backlighting (halo lights) in addition to the white Spot, Scene, etc lighting.
Here is the link for the setup I bought.
https://offroadalliance.com/collect...s-b-br-17-raptor-triple-bezels-br-hardware-bf
I configured it with a Baja Designs Wide Cornering Amber light on the outside, Rigid Radiance Scene light in the middle, and Rigid Radiance Spot light on the inside position.
Last edited:
WRCRaptor
FRF Addict
I installed Icons set at option 3 this weekend and wow is it high without anything in the back almost 4"! If they sag a bit that would be great but I think a set of RPG drop shackles are needed. I went option 3 because about 6-10 times are year I have about 700lb to carry and on my Gen1 the Deavers +3 HD they sagged a ton after one year.
So this time I wanted to try Icon and set to option 3 the ride is firm like a euro car over expansion joint and wash board. The rear does not skip around at all and most of the axle hop is gone under acceleration. Just like my Gen1 rear springs made a huge difference in a positive way loaded or not.
I do have Eibachs up front and they are also a great mod. I liked the Gen2 in stock form for daily driving although it was a bit unsettled in the rear on wash board and small bumps, tire air pressure made a big difference. I just like a bit firmer ride on the street and increased sag resistance when loaded. These springs do give you more confidence and control off road for sure. I think if you are not carrying lots of weight that Icon option 2 and Eibachs would be perfect.
I have a Live valve 2019 and I have not noticed any issues with the shocks and the higher ride height.
The Rear Icons also remove about 80% of the axle hop under acceleration.
Next Mod KHC Toque arm.
So this time I wanted to try Icon and set to option 3 the ride is firm like a euro car over expansion joint and wash board. The rear does not skip around at all and most of the axle hop is gone under acceleration. Just like my Gen1 rear springs made a huge difference in a positive way loaded or not.
I do have Eibachs up front and they are also a great mod. I liked the Gen2 in stock form for daily driving although it was a bit unsettled in the rear on wash board and small bumps, tire air pressure made a big difference. I just like a bit firmer ride on the street and increased sag resistance when loaded. These springs do give you more confidence and control off road for sure. I think if you are not carrying lots of weight that Icon option 2 and Eibachs would be perfect.
I have a Live valve 2019 and I have not noticed any issues with the shocks and the higher ride height.
The Rear Icons also remove about 80% of the axle hop under acceleration.
Next Mod KHC Toque arm.
Had Ford reflash the PCM/ECM and whatever else it is they do for the harsh shifting into drive and gear skips. Truck hit me with the wrench light the other day and went into limp mode, wouldn’t shift, etc. Limped it straight to Ford and voila, good as new.
have some other goodies but I’ve yet to actually install them so more to come..
have some other goodies but I’ve yet to actually install them so more to come..
Sgt Beavis
Full Access Member
I finally got the @KB Voodoo Fabrications Max Modular and iKamper installed this week. We're heading out camping on Saturday.
As you can see, the rear sags when the tent is open and my wife is up there. However it doesn't appear to sag at all when the tent is closed up. Still, I'm probably going to add a new leaf spring.
When I initially tried to install it, I used iKampers Gen 2.0 mounting brackets. Those wouldn't work with the Max Modular's thick crossbars so I had to buy the original 1.0 brackets. Those worked just fine. The iKamper is VERY nice. Surprisingly so. It's be enough for me and my wife to keep a small dog kennel for her Westie. I think there will be some fun times in our future..
As you can see, the rear sags when the tent is open and my wife is up there. However it doesn't appear to sag at all when the tent is closed up. Still, I'm probably going to add a new leaf spring.
When I initially tried to install it, I used iKampers Gen 2.0 mounting brackets. Those wouldn't work with the Max Modular's thick crossbars so I had to buy the original 1.0 brackets. Those worked just fine. The iKamper is VERY nice. Surprisingly so. It's be enough for me and my wife to keep a small dog kennel for her Westie. I think there will be some fun times in our future..
CoronaRaptor
FRF Addict
very cool set up, even the wife looks happy, which is always a plusI finally got the @KB Voodoo Fabrications Max Modular and iKamper installed this week. We're heading out camping on Saturday.
As you can see, the rear sags when the tent is open and my wife is up there. However it doesn't appear to sag at all when the tent is closed up. Still, I'm probably going to add a new leaf spring.
When I initially tried to install it, I used iKampers Gen 2.0 mounting brackets. Those wouldn't work with the Max Modular's thick crossbars so I had to buy the original 1.0 brackets. Those worked just fine. The iKamper is VERY nice. Surprisingly so. It's be enough for me and my wife to keep a small dog kennel for her Westie. I think there will be some fun times in our future..
jzweedyk
FRF Addict
Got to take it out on a windy, foggy beach run, about 12 miles long. I let the Jeep follow.
Raptus
Full Access Member
That looks like it will be a lot of fun to camp in!I finally got the @KB Voodoo Fabrications Max Modular and iKamper installed this week. We're heading out camping on Saturday.
As you can see, the rear sags when the tent is open and my wife is up there. However it doesn't appear to sag at all when the tent is closed up. Still, I'm probably going to add a new leaf spring.
When I initially tried to install it, I used iKampers Gen 2.0 mounting brackets. Those wouldn't work with the Max Modular's thick crossbars so I had to buy the original 1.0 brackets. Those worked just fine. The iKamper is VERY nice. Surprisingly so. It's be enough for me and my wife to keep a small dog kennel for her Westie. I think there will be some fun times in our future..
Sent from my iPhone using Tapatalk
Similar threads
