Does it retain heat function?
What did you do to your Raptor today? (Gen2)
- Thread starter Jepper
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
https://www.amazon.com/dp/B0D3TPBM5D/?tag=fordraptorforum-20
I bought when they had a non-heated option. I live in FL and didn't need it but that's the link to the heated one.
Thanks!! Is it real carbon?
I opted for the non heated one, but here is the link to the heated one:
https://www.amazon.com/dp/B0D3TPBM5D/?tag=fordraptorforum-20
Diverdown3
Full Access Member
Yesterday...
Takeaways:
1) Take your time and YouTube fuel tank disconnects. Patience will save you more time than you can imagine. Wiggle, thump (with handle of screwdriver), wiggle, thump and continue as you increasingly loosen the connections until you can safely disengage them. My truck lived in West Texas for 6 years and had unseen amounts of sand and worse, granite dust in the connections.
2) Before re-installing the drivers side front leaf spring eyelet bolt, cut off 1/2" from the end, otherwise this will make contact with the tank, and no one wants that. After cutting, reinstall the bolt from the exterior to the interior of the chassis. That way you can get to it in the future, if needed and it will not gouge the tank.
Takeaways:
1) Take your time and YouTube fuel tank disconnects. Patience will save you more time than you can imagine. Wiggle, thump (with handle of screwdriver), wiggle, thump and continue as you increasingly loosen the connections until you can safely disengage them. My truck lived in West Texas for 6 years and had unseen amounts of sand and worse, granite dust in the connections.
2) Before re-installing the drivers side front leaf spring eyelet bolt, cut off 1/2" from the end, otherwise this will make contact with the tank, and no one wants that. After cutting, reinstall the bolt from the exterior to the interior of the chassis. That way you can get to it in the future, if needed and it will not gouge the tank.
Last edited:
remyboyphil
Member
Sharpie69
Full Access Member
Was that after an accident, or was it just a fire ??
remyboyphil
Member
Didn’t see any other cars so I assume it was just a fire.
TwizzleStix
Pudendum Inspector aka FORZDA 1
Looks like the seat belt tensioner squib fire. There was a recall for Ford to f*ck it up more as well.
Similar threads
