What did you do to your Gen 3 today?

[Specialtyperformanceparts]

Threw my squadrons behind the grille. Still have to wire them up. Interested to see how much light the redesigned grille knocks out. So wiring and some adjustments will be getting done in the next few days. Thanks @Specialtyperformanceparts
View attachment 451449

Looks GREAT!!

We just picked up our 2024 37 Pkg today, so we will have new options on that new bumper real soon!

John

 

[Antho]

Looks GREAT!!

We just picked up our 2024 37 Pkg today, so we will have new options on that new bumper real soon!

John

Thanks! A low profile bumper bar for a light setup would be nice. I don’t live in a bad part of town but with only the 6 bolt points on the modular bumper is kinda sketchy. Someone could be off with a bar full of lights in 5 minutes. Maybe offer some security hardware that would fit into the bumper nutserts if you do a bumper bar? @Specialtyperformanceparts

 

[Specialtyperformanceparts]

Thanks! A low profile bumper bar for a light setup would be nice. I don’t live in a bad part of town but with only the 6 bolt points on the modular bumper is kinda sketchy. Someone could be off with a bar full of lights in 5 minutes. Maybe offer some security hardware that would fit into the bumper nutserts if you do a bumper bar? @Specialtyperformanceparts

Yeah, that’s the plan.
We have our bumper mounts for the 40” light bars and cross mounts which I need to look and see on the back side if they will
Still work as well. After all, the old bumper still comes on the non 37/R and those will still work. So if the bolt pattern on the back is the same (which I doubt) it would there too.
So I think one thing I will bring out is like I have for the Bronco-

SPV Parts 2021+ Ford Bronco Modular Bumper Light / Light Bar Kit with 30" Light Bar or 2 Lights

SPV Parts 2021+ Ford Bronco Modular Bumper Light / Light Bar Kit with 30" Light Bar or 2 Lights IN-STOCK & SHIPPING NOW!!! SPV Parts is pleased to offer our newest mounting solution for your 2021+ Ford Bronco with Modular Bumper. These mounts can also be purchased separately. Then you can...

specialtyperformanceparts.com

And Maybe this-

SPV Parts 2021+ Ford Bronco Modular Bumper Universal Slotted Cross Mount Kit (Fits MANY lights)

SPV Parts 2021+ Ford Bronco Modular Bumper Universal Slotted Cross Mount Kit (Fits MANY lights) IN-STOCK & SHIPPING NOW!!! INCLUDES LIGHTS and harness. The kits listed here are only a few of the MANY combinations you can select. Because your choices are almost infinite. We are only listing a few...

specialtyperformanceparts.com

But I think an adaptation for the 40” light bar like we have for the other bumper but from those mount points. As far as those Star bolts. There is a replacement Security type. So you could replace those bolts-

SPV Parts 2021+ Gen 3 Ford Raptor Baja Designs S8 or ONX6+ 40 inch Bumper Light Bar Kit

SPV Parts 2021+ Ford Raptor S8 & ONY6 40" Bumper Light Bar Kit Alright, get excited! Now you can skip buying heavy aftermarket bumpers just to mount a Light Bar to your Raptor! The New Raptor Bumper Mounts allow you to mount a 40 inch Light Bar to your Raptor. Big heavy bumpers are susceptible...

specialtyperformanceparts.com

 

[Waterfowler41]

Obligatory, did not happen today but a few days ago. Installed the Bak Revovler X4ts on my Raptor just in time for a hockey tournament this rainy weekend.

Going to be adding chase lights and a rack to the t-slots in the near future.

 

[Specialtyperformanceparts]

Obligatory, did not happen today but a few days ago. Installed the Bak Revovler X4ts on my Raptor just in time for a hockey tournament this rainy weekend.

Going to be adding chase lights and a rack to the t-slots in the near future.

View attachment 451579View attachment 451580

Looks great! I love those. Those are a great option when you want a hard cover that doesn’t fold and block the back window, and also need one that doesn’t have a container that takes up part of the inside of the truck bed.

John

 

[77Raptor]

Obligatory, did not happen today but a few days ago. Installed the Bak Revovler X4ts on my Raptor just in time for a hockey tournament this rainy weekend.

Going to be adding chase lights and a rack to the t-slots in the near future.
View attachment 451580

I have the Retrax MXPro or whatever the plastic cover is with the T-slots. It's a great cover, but I didn't know there was a Bak Revolver option with the T-slots at the time otherwise I'd have gone that route instead. I was wondering if you could answer two questions for me on this cover you have:

1. Is there any kind of rattle that comes from the cover when it's unrolled and you're driving down the road? My Retrax rattles (even on relatively smooth roads) and when I open the sliding rear window to let fresh air in, it's really annoying to listen to that.

2. Do you know how big/what the diameter of the cover is when rolled up?

 

[Waterfowler41]

I have the Retrax MXPro or whatever the plastic cover is with the T-slots. It's a great cover, but I didn't know there was a Bak Revolver option with the T-slots at the time otherwise I'd have gone that route instead. I was wondering if you could answer two questions for me on this cover you have:

1. Is there any kind of rattle that comes from the cover when it's unrolled and you're driving down the road? My Retrax rattles (even on relatively smooth roads) and when I open the sliding rear window to let fresh air in, it's really annoying to listen to that.

2. Do you know how big/what the diameter of the cover is when rolled up?

Bak just released this cover so right place right time for me as I had the retrax in my cart.

1. No rattle that I can hear with my rear window open. I had soft tonneau that slapped a bit at higher speeds. There’s an aluminum claw that grabs the sides and holds them in place so I suspect that helps.

2. ~ 9”

 

[Waterfowler41]

Looks great! I love those. Those are a great option when you want a hard cover that doesn’t fold and block the back window, and also need one that doesn’t have a container that takes up part of the inside of the truck bed.

John

So far it’s an awesome cover. Install was easy peasy. Going add some pods to the front of the t slots as chase lights soon. I show this near the end of my video.

 

[77Raptor]

Bak just released this cover so right place right time for me as I had the retrax in my cart.

1. No rattle that I can hear with my rear window open. I had soft tonneau that slapped a bit at higher speeds. There’s an aluminum claw that grabs the sides and holds them in place so I suspect that helps.

2. ~ 9”

Thanks for the answers. And I just watched your video. Nice work! Glad to hear that it doesn't rattle or anything. Two more questions for you, if I may?

1. The cover is either all the way open or all the way closed, right? There's no way to open it part way and have it stay in place?

2. The side tracks/rails look like they extend into the bed area quite a bit. In your opinion, do you think you could still fit an ATV in the bed between the rails?

 

[Waterfowler41]

Thanks for the answers. And I just watched your video. Nice work! Glad to hear that it doesn't rattle or anything. Two more questions for you, if I may?

1. The cover is either all the way open or all the way closed, right? There's no way to open it part way and have it stay in place?

2. The side tracks/rails look like they extend into the bed area quite a bit. In your opinion, do you think you could still fit an ATV in the bed between the rails?

1. Correct, open or closed.

2. Side rails extend 2.5” from the bedside edge. 57.5” between the rails, no idea how wide your atv is but that’s what you have to fit between.