What did you do to your Gen 3 today?

[MrSasquatch]

Found out that my truck will fit in the garage if I touch the back wall with the little protustion in front of the rear license plate. Doesn’t leave any room to get in and out of the garage so I spent my weekend reorganizing the storage in the garage so I can fit it on the other side. Happy to get the raptor out of the Texas sun and still be able to fit ol CRV-DOS in with it

Edit: Also enjoyed the warmer weather and did some detailing

Double Edit: math is fun. Shelving fits right over the bed

 

[cscape]

First time hearing of Slidemaster. Looks like an interesting option. You happy with the quality? How was the install?

Quality of the slide is great, the tray is just particle board with carpet wrapped in an aluminum frame (option I chose). I think the aluminum looks a little poor and unfinished could be a bit higher quality but regardless works for my needs. I got a 100% full extension with multiple stops. 1/4,1/2,3/4. The frame is made of steel and I got it powder coated black through them. It looks and feels really solid.

As for install - that’s another story. I had a hard time working with them around mounting instructions and how and where to mount it (since it’s custom size). I refused to drill into the bed - so I had a local installer make some custom brackets for it that use the bed bolts. It was worth it to do it right and the bedrug can sit on top of it.

 

[cscape]

A few more

 

[x-ray]

Gave the truck a bath today with plans to ceramic coat it tomorrow with CQuart UK 3.0. Then I installed the Bak X4S tonneau cover and then the BedRug Bed Mat after getting the bed Rhino lined. Love how nice the Bedmat makes it to kneel in the bed. Strapped down my cheap Home Depot storage box with random stuff.

 

[Littlefx4]

Gave the truck a bath today with plans to ceramic coat it tomorrow with CQuart UK 3.0. Then I installed the Bak X4S tonneau cover and then the BedRug Bed Mat after getting the bed Rhino lined. Love how nice the Bedmat makes it to kneel in the bed. Strapped down my cheap Home Depot storage box with random stuff.

I see you’re not using the box tie downs so what do you have the straps connected to?

 

[Juanitobunito]

Just installed my rear wheel well liners from “Rugged Liner” . Relatively easy install. Just had to take out the 8 fasteners from the wheel well trim, slide on 2 clips for 2 additional fasteners, and put the liner in the well. Only part of remote difficulty was getting the liner lip under the inside edge of the wheel well trim edge. I used a pry tool which saved the day. A flat head would have really knarled up the wheel trim. Once the outer lip of the liner is tucked under the wheel well rim, you simply rescrew on the 8 fasteners. As they are tightened, they essentially secure the lip of the liner tightly underneath. Lastly, you need to screw in the 2 added supplied fasteners to the 2 added supplied clips and you’re done.

 

[jakerjaker19]

Jaker, what is your wheel and tire setup? They look very sharp!

Sorry about the late reply and thanks for the nice comment. It took me a while to land on a color wheel that goes well with Avalanche Grey. Obviously Black would have been easy but when I saw these Titanium Method MR 317's I knew Thats what I had to get. The tire is Nitto Recon Grappler A/T.

 

[jakerjaker19]

-Full Xpel Ultimate Plus PPF wrap - clear on Atlas Blue and stealth on the grey fenders.

-Ethos Ceramic Graphene Coating on everything including wheels and smartcap.

-XPEL XR Plus ceramic tint 30% in front 55% rear and windshield.

Slidemaster custom bedslide (Arb Zero 63qt fridge and OVS kitchen slide drawer pictured).

More goodies to come including a GFC rooftop tent and an OVS 270 awning for the sun and rain.

Im digging your overloading mods, however I get nervous adding all that weight to my 2023. My 2020 really sagged with a continuous 350 LB on the bed to the point I had swap out the stock leafs with Deaver +4's. When you add the RTT, with the shell, sliders and Fridge are you keeping the stock springs?

 

[Juanitobunito]

Sorry about the late reply and thanks for the nice comment. It took me a while to land on a color wheel that goes well with Avalanche Grey. Obviously Black would have been easy but when I saw these Titanium Method MR 317's I knew Thats what I had to get. The tire is Nitto Recon Grappler A/T.

Nice, no worries on the late reply. We all have lives. Could I ask the sizes of both? Are the wheels a 0 Offset?

 

[MeFryRice]

Got around to install the Evil front bumper and Full-Race Intercooler. I can’t say enough about how great Doug @EvilMfg is. Now I just need to install the LP6 once they arrive.