What did you do to your Gen 3 today?

[jsimon77]

Front license plate hole fill with painted 3mm plugs courtesy of Gobluejd. Front and rear Tuxmats. Line-X bed liner.

On the way: Builtright stubby antenna and seat latch, Undercover Armor flex tonneau cover.

Do you happen to have the paint code / name that you used for the plugs? Assuming it was the silver ish color?

 

[Low Rider]

Finished up putting the graphics on the front and back letters and the graphics on the hood. Oh also a new tonneau cover.

 

[Spooky]

Do you happen to have the paint code / name that you used for the plugs? Assuming it was the silver ish color?

License Plate Holes

Picked up some 5mm plastic rivets to plug the license plate holes in the front bumper as @KevoUsmc suggested. Hit them with some Krylon Fusion Metallic Aluminum spray paint and a couple of coats of clear and they look like an OEM part.

www.fordraptorforum.com

 

[Spooky]

License Plate Holes

Picked up some 5mm plastic rivets to plug the license plate holes in the front bumper as @KevoUsmc suggested. Hit them with some Krylon Fusion Metallic Aluminum spray paint and a couple of coats of clear and they look like an OEM part.

www.fordraptorforum.com

There are a couple of colors mentioned in that thread. I used the metallic silver and it matches pretty well.

 

[4wheelinAZ]

Do you happen to have the paint code / name that you used for the plugs? Assuming it was the silver ish color?

Just order a pair from bumperPlugs. No painting or anything required. You might still have to email them as the color wasn’t listed on their website when I ordered.

 

[Low Rider]

Got my front and back letters installed along with the hood graphics. Josh is going to make side graphic once we come up with a design. Ordered mud flaps from RokBlokz and they will be here Tuesday.

 

[GoldBeach]

I tinted my headlights. ....poorly. The contouring in the upper outer corners was pretty irritating. I have enough material to try again to get a better outcome, but I'm not sure I can do it any better. It looks ok as long as you don't get too close.

 

[Spooky]

Installed a bed rug under the tonneau cover. Put my mods in my signature so others can follow my addiction…..

 

[MDJAK]

I tinted my headlights. ....poorly. The contouring in the upper outer corners was pretty irritating. I have enough material to try again to get a better outcome, but I'm not sure I can do it any better. It looks ok as long as you don't get too close.

Does that not cut down the lumens?

 

[stoppard stop]

I put a raptor in my raptor