What did u do to your raptor today?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

wjoutlaw

Full Access Member
Joined
Sep 21, 2021
Posts
223
Reaction score
605
Location
San Antonio, Texas
There were some write ups here about a piece of the blend door actuator breaking and falling into the blower fan making one heck of a racket and vibration. I believe there was also a YouTube video included in one of the writeups showing how to get it out without tearing the whole dash out, which is what the dealers do.
Got an answer back from the dealeship and it was one of the actuator doors that broke off and went into the blower motor just like you said. I have the CarMax warranty on my truck so that is 100% covered minus the $50 deductible. Their warranty is painless to use. All the service tech had to do was call them and give them my information and had approval right then.

My brakes were also needing to be done too so I had them replace the front and rear brakes, replace the fluid in the front and rear differentials, and flush the power steering fluid. I was planning on doing the fluids myself soon, but since it was at the dealership, I had them go ahead and take care of it.

I could have done the brakes myself, but I just had eye surgery and I can't strain myself for the next few weeks. I'd rather pay someone to do all of that rather than to risk my eyesight.
 

Whoops

Active Member
Joined
Dec 4, 2023
Posts
89
Reaction score
253
Location
Santa Cruz
Did the transmission cooler (Saudi cooler) upgrade and a B&M style transmission dipstick today. Seemed to me, mounting directly to the firewall was gonna make it difficult to thread the dipstick so I made a little bracket for mounting. Got the Spicer diff cover and an Afco intercooler coming up soon
 

Attachments

  • dipstick mount.jpg
    dipstick mount.jpg
    78.5 KB · Views: 25

wjoutlaw

Full Access Member
Joined
Sep 21, 2021
Posts
223
Reaction score
605
Location
San Antonio, Texas
Did the transmission cooler (Saudi cooler) upgrade and a B&M style transmission dipstick today. Seemed to me, mounting directly to the firewall was gonna make it difficult to thread the dipstick so I made a little bracket for mounting. Got the Spicer diff cover and an Afco intercooler coming up soon
I did the same upgrades too. The dipstick and the larger transmission cooler. I have a power steering fluid cooler but need to find the time/energy to accomplish the install.
 

radelow

Full Access Member
Joined
Oct 18, 2016
Posts
163
Reaction score
238
Location
San Diego, California
Busy couple weeks...

1. Installed a RPG Trophy front bumper with addon bar for lights.
2. Ordered up a set of Morimoto XB headlights with amber DRL's
3. Ordered an Xtrusion Offroad Bed Cage

Been awhile since I gave my truck some love and the Baja racing season is once again upon us (the 500 is this weekend) so I have quite a few days of chasing in my future...
 
Last edited:

Whoops

Active Member
Joined
Dec 4, 2023
Posts
89
Reaction score
253
Location
Santa Cruz
Busy couple weeks...

1. Installed a RPG Trophy front bumper with addon bar for lights.
2. Ordered up a set of Morimoto XB headlights with amber DRL's
3. Ordered an Xtrusion Offroad Bed Cage

Been awhile since I gave my truck some love and the Baja racing season is once again upon us (the 500 in this weekend) so I have quite a few days of chasing in my future...
No pics of the new bumper? I'm feeling a little short changed.
 

Whoops

Active Member
Joined
Dec 4, 2023
Posts
89
Reaction score
253
Location
Santa Cruz
I did the same upgrades too. The dipstick and the larger transmission cooler. I have a power steering fluid cooler but need to find the time/energy to accomplish the install.
What cooler are you using for PS? I think it's a good. On my Tundra I used Howe cool tubes, might see if I can find a similar solution for this truck.
 
Top