What did u do to your raptor today?

[Gen1TillDeath]

Used that egg crate foam I stole from my pistol case, and jammed it up in both window switches, and took down the overhead console and foamed that mfer up
Too… and put in f150leds in there

I am not playing with these plastic interior rattles anymore, it’s all getting foamed!

Just grabbed some F150leds myself. For both interior lights

 

[jackjare9455]

Just grabbed some F150leds myself. For both interior lights

I gave the map lights a test… they are bright!! Ordering the dome tomorrow

 

[wjoutlaw]

I gave the map lights a test… they are bright!! Ordering the dome tomorrow

That's one of the first upgrades I did was LED lights everywhere on the exterior and interior, except for the HID Headlights. Highly recommend.

 

[Gen1TillDeath]

I should have went ahead and got the puddle lights too, but just wanted to see how the “f150led” worked out as I haven’t had experience with them yet

 

[Cody Templeton]

I have the F150LED's full interior kit as well, definitely one of my favorite things I've done!

 

[Gryphon313]

Achieved this:



This is 4 or 5 tanks worth of MPG’s. When I got the truck at 103k miles it showed 7.5mpg. It settled at 13.2 after a couple thousand miles. I did a bunch of maintenance and reset the trip meter. I am at 14.5mpg for the last few thousand miles. Truck seems pretty happy at the moment.

 

[badm0t0rfinger]

Achieved this:

View attachment 393262

This is 4 or 5 tanks worth of MPG’s. When I got the truck at 103k miles it showed 7.5mpg. It settled at 13.2 after a couple thousand miles. I did a bunch of maintenance and reset the trip meter. I am at 14.5mpg for the last few thousand miles. Truck seems pretty happy at the moment.

Previous owner had a heavy right foot. When I lived in Hawaii I had a solid 14.4 mpg or so. Had about a 40 mile round trip with most of it high way.

After adding all my camping ******** I still get around 12.5

 

[wjoutlaw]

I'm at 13.3mpg averaging the last few thousand miles. I was around mid 12s before I installed the cold air intake. I need to reinstall my pedal commander. I took it out when I got the dreaded wrench symbol.

 

[TomDirt]

First time hanging the updated spindle. Still waiting for the thick washers on the double shear steering.

 

[jackjare9455]

Ordered the drivers seat side trim, all three pieces (main, seat belt cover and switch panel). I guess the PO mangled and broke all the clips/connectors and I finally noticed it, it was all loose as hell.

I also changed my wife’s rear brakes on her expedition last night, used the rotors and the sun today to try and flatten out my new bed mat, it’s still rolled up in the front end a little.