What did u do to your raptor today?

[gwpfan]

Installed my putco blade (with a couple mods)
Got rid of this pesky thing

What is that 'pesky thing'?

 

[ogdobber]

What is that 'pesky thing'?

its the circuit control board. necessary for an easy plug and play. it dims the red for running lights as well as making the yellow operate "as they should", among other things.


Sent from my SM-G950U using Tapatalk

 

[gwpfan]

Got it, circuit board on the Putco.
Thanks, wanted to make sure I wasn't missing out on an easy mod!

 

[SZDZMTR]

its the circuit control board. necessary for an easy plug and play. it dims the red for running lights as well as making the yellow operate "as they should", among other things.


Sent from my SM-G950U using Tapatalk

Great custom touch with the "blade" .

 

[raptorpaul]

Installed my putco blade (with a couple mods)
Got rid of this pesky thing (*putco circuit board)

Hooked up the ambers on upfitter 2 for dust

Then made the turn signal red (instead of yellow)

And of course the reverse light

I have to say, wow... They are all really bright, pictures don't do it justice...like too bright to even use the red brake and turn in everyday driving. Just in case i put a plug on the red so i can disconnect.
Didn't hook up the running lights, because i dont like the look of that on a raptor


Sent from my iPhone using Tapatalk Pro

Very nice. Would love to know how you wired it up like that. I don’t like the stock amber turn signals.


Sent from my iPhone using Tapatalk

 

[gryGhst17]

Ha!




Sent from my iPhone using Tapatalk

 

[ogdobber]

Very nice. Would love to know how you wired it up like that. I don’t like the stock amber turn signals.


Sent from my iPhone using Tapatalk

its really just a direct wire. each color has a left and right and positive and negative. so 12 total wires. the reverse is tapped into the center of the 7 pin, (stop, left and right) just go to green and yellow. and the ambers i ran a wire up through the frame to my upfitter 2 switch wire.
if you want running lights, you need to lower the voltage to get them dimmer and then tap into brown...the easiest way to do that use the putco circuit and swap around the wires for the red.

 

[j2k]

Swapped out my air filter and installed a pre-filter to try to keep it a little cleaner.

 

[j2k]

New led puddle lights from Amazon. Had previously just put led bulbs but these are really bright!


Also new leather center console



Sent from my iPhone using Tapatalk Pro

What puddle lights did you go with from Amazon? I've been thinking about swapping out the LED bulbs I currently have in there for something a little brighter.

 

[ogdobber]

What puddle lights did you go with from Amazon? I've been thinking about swapping out the LED bulbs I currently have in there for something a little brighter.

These ones. $20 prime
https://www.amazon.com/gp/product/B074L2JP9S/?tag=fordraptorforum-20


Sent from my iPhone using Tapatalk Pro