What did u do to your raptor today?

[TomDirt]

This is me, once again.

 

[TomDirt]

Finally got the T35 bit in the mail. Tools required to take apart Gen 1 front bumper: Torx T35 for exterior fasteners, 10mm socket for interior brackets, 1/2" socket for bumper pads, 5.5mm socket to remove mini grill. WTF were they thinking? Some engineering meeting: "let's make this a challenge, using odd sizes & mix metric with sae"?

 

[CoronaRaptor]

Finally got the T35 bit in the mail. Tools required to take apart Gen 1 front bumper: Torx T35 for exterior fasteners, 10mm socket for interior brackets, 1/2" socket for bumper pads, 5.5mm socket to remove mini grill. WTF were they thinking? Some engineering meeting: "let's make this a challenge, using odd sizes & mix metric with sae"?

I just swapped a 2021 jeep gladiator bumper onto my kids 2015 wrangler, just shut up 'cause I had to use 3 sockets sets and an impact socket set to get that apart and back together again, plus redo the wiring for the fog lights!

 

[mojoraptor]

Little Rock crawling and a little desert ripping

 

[SVTRap]

Jailbroke my Sync3 so the front camera works once again

 

[The Car Stereo Company]

View attachment 354679View attachment 354678
Little Rock crawling and a little desert ripping

get your butt back to the gen 2 section. this is for og's

 

[Raptor-YYC]

Nice! Did you install the graphics yourself?

No. I had Icon tinting in Calgary do it. He also tinted front door glass and replaced some 3m for me. Very pleased with his work

 

[TomDirt]

Just spent a couple of hours rotating tires and replacing lug nuts. Knew this day was coming, but the OEM lug nuts finally deformed enough that I had to hammer a socket on more than half just to remove them.

Good times!

I ended up buying a 22mm deep socket to get the swollen 21mm oem lug nuts.

 

[bubblehead93]

J2Fab 375 amp alternator

 

[kuuzi]

Here’s some pictures of the interior of the bed cap/ camper shell.