Triple Fog Light Kits Featuring 100% American Made/Stainless Steel Brackets

[4x4TruckLEDs.com]

On the Rigid Radiance kits you'll use 4 upfitters. 1 for each pair of lights, the 4th is for the back lighting. Our harness has a control wire for each light you connect. Pretty easy.

If you don't want to use your upfitter we can (at no charge) include a fuse tap which you would use to connect to an available circuit in your fuse panel. We don't make you run a wire into your cab or take apart anything inside there. The fuse tap is the easiest way to do it and there are plenty of circuits in there that come on when the truck is on. So this is an ideal method.

Baja Design kits don't have a control wire, as they don't have back lighting. You get more patterns with Baja and more light output.

 

[dmb359]

On the Rigid Radiance kits you'll use 4 upfitters. 1 for each pair of lights, the 4th is for the back lighting. Our harness has a control wire for each light you connect. Pretty easy.

If you don't want to use your upfitter we can (at no charge) include a fuse tap which you would use to connect to an available circuit in your fuse panel. We don't make you run a wire into your cab or take apart anything inside there. The fuse tap is the easiest way to do it and there are plenty of circuits in there that come on when the truck is on. So this is an ideal method.

Baja Design kits don't have a control wire, as they don't have back lighting. You get more patterns with Baja and more light output.

I do want to use the upfitter, Ideally I'd use 3 aux switches to control the 3 sets of lights, and a 4 switch to control the backlighting if I went that route. I just wasnt sure if it would still need fuse tapping as well.

If I go BD, I'll probably do a corner, a driving, and either a spot light or an amber corner. Just not sure if I'd do SAE or if I'd do an amber lenses, or if I'd do S2 for one of the pairs.

 

[4x4TruckLEDs.com]

Fuse tap is optional. It's one or the other. So you can decide at the time of installation if you want to go the fuse tap route OR use an upfitter to control your back lighting.

A lot of folks do 2 sets of SAE. One Amber, one clear. and then the 3rd set of lights are Driving/Combos. I like that setup the best.

Lots of options, all depends on your use.

 

[4x4TruckLEDs.com]

Thanks for the support over the last few weeks folks. We know times are tough for most and we're fortunate enough to be in a position where we can keep our warehouse open for shipping (sorry, no walk-ins or customer pickups allowed right now though).

Don't forget we're currently taking $$ off our Triple Fog Light Kits when you use coupon code FOGS at checkout. We have PLENTY of inventory on-hand (we've been receiving huge shipments of lights over the past few weeks to ensure we keep our warehouse stocked of lights you want). All orders ship within 24 hours (to your door step on average in 2-3 days).

https://www.4x4truckleds.com/vehicl...2017-2018-f-150-raptor/triple-fog-light-kits/


Included with each kit are the following:

• 1 Pair of CrystaLux Triple Fog Light Brackets
  
• Mounting Hardware
• 3 Pairs of Lights
  
• All-In-One Wiring Harness to connect to your OEM upfitter switches (each pair of lights will have independent control via your OEM upfitter switches)
• Instructions
• Our "Raptor Lifetime Guarantee". For as long as you own your Raptor, if you manage to break/bend/destroy these brackets we'll replace them free of charge (not including return shipping)

Baja Designs Sportsmen Kit: $729
https://www.4x4truckleds.com/2017-ford-raptor-triple-fog-light-kit-w-baja-designs-lights-sportsmen/

• S2 Sport, Wide Cornering (Pair)
• Squadron Sport, Driving/Combo (Pair)
• Squadron Sport, Spot (Pair)

Baja Designs Pro Kit: $1,039
https://www.4x4truckleds.com/2017-ford-raptor-triple-fog-light-kit-w-baja-designs-lights-pro/

• S2 Sport, Wide Cornering (Pair)
• Squadron Pro, Driving/Combo (Pair)
• Squadron Pro, Spot (Pair)

Baja Designs Unlimited Kit: $1,229
https://www.4x4truckleds.com/2017-ford-raptor-triple-fog-light-kit-w-baja-designs-lights-unlimited/

• S2 Pro, Wide Cornering (Pair)
• Squadron Pro, Driving/Combo (Pair)
• Squadron Racers, Spot (Pair)

And of course you can Build Your Own Kit: $729 (starting price)
https://www.4x4truckleds.com/2017-f...ght-kit-w-baja-designs-lights-build-your-kit/


Rigid Industries D-Series Kit: $689 (starting price)
https://www.4x4truckleds.com/2017-ford-raptor-triple-fog-light-kit-w-rigid-industries-d-series/


Rigid Industries Radiance Kit: $549 (starting price)
https://www.4x4truckleds.com/2017-ford-raptor-triple-fog-light-kit-w-rigid-industries-radiance/


Rigid Industries 360-Series Kit: $1,099
https://www.4x4truckleds.com/2017-ford-raptor-triple-fog-light-kit-w-rigid-industries-360-series/

 

[dmb359]

Finally caved and ordered the BD pro kit.

[emoji106]


Sent from my iPhone using Tapatalk

 

[4x4TruckLEDs.com]

Thanks for the business. Saw it come in while shipping orders... picked/packed/shipped it for you. You should have it shortly. Be sure to post some photos up once you get it installed

 

[4x4TruckLEDs.com]

Use coupon code FOGS at checkout and save cash on our fog kits! We have PLENTY of inventory on-hand (we've been receiving huge shipments of lights over the past few weeks to ensure we keep our warehouse stocked of lights you want). All orders ship within 24 hours (to your door step on average in 2-3 days).

https://www.4x4truckleds.com/vehicl...2017-2018-f-150-raptor/triple-fog-light-kits/


Included with each kit are the following:

• 1 Pair of CrystaLux Triple Fog Light Brackets
  
• Mounting Hardware
• 3 Pairs of Lights
  
• All-In-One Wiring Harness to connect to your OEM upfitter switches (each pair of lights will have independent control via your OEM upfitter switches)
• Instructions
• Our "Raptor Lifetime Guarantee". For as long as you own your Raptor, if you manage to break/bend/destroy these brackets we'll replace them free of charge (not including return shipping)

Baja Designs Sportsmen Kit: $729
https://www.4x4truckleds.com/2017-ford-raptor-triple-fog-light-kit-w-baja-designs-lights-sportsmen/

• S2 Sport, Wide Cornering (Pair)
• Squadron Sport, Driving/Combo (Pair)
• Squadron Sport, Spot (Pair)

Baja Designs Pro Kit: $1,039
https://www.4x4truckleds.com/2017-ford-raptor-triple-fog-light-kit-w-baja-designs-lights-pro/

• S2 Sport, Wide Cornering (Pair)
• Squadron Pro, Driving/Combo (Pair)
• Squadron Pro, Spot (Pair)

Baja Designs Unlimited Kit: $1,229
https://www.4x4truckleds.com/2017-ford-raptor-triple-fog-light-kit-w-baja-designs-lights-unlimited/

• S2 Pro, Wide Cornering (Pair)
• Squadron Pro, Driving/Combo (Pair)
• Squadron Racers, Spot (Pair)

And of course you can Build Your Own Kit: $729 (starting price)
https://www.4x4truckleds.com/2017-f...ght-kit-w-baja-designs-lights-build-your-kit/


Rigid Industries D-Series Kit: $689 (starting price)
https://www.4x4truckleds.com/2017-ford-raptor-triple-fog-light-kit-w-rigid-industries-d-series/


Rigid Industries Radiance Kit: $549 (starting price)
https://www.4x4truckleds.com/2017-ford-raptor-triple-fog-light-kit-w-rigid-industries-radiance/


Rigid Industries 360-Series Kit: $1,049
https://www.4x4truckleds.com/2017-ford-raptor-triple-fog-light-kit-w-rigid-industries-360-series/

 

[4x4TruckLEDs.com]

We're still open for business and shipping fog kits on a daily basis. Get your order in now and take advantage of our special savings right now on fog kits.

Use coupon code FOGS and you'll save money at checkout on our fog kits.

Check out what Derek had to say on his recent purchase

Everything I wanted. I didn’t end up using the add on extension brackets and Adam is being super cool about allowing me to send those back, if you’re wanting your lights to be mounted right side up (letters reading the right way) then you’ll want these tho. In my opinion best part of the kit was the all in one wiring harness... so simple. Tools Required: Metric sockets, handful of hand wrenches, wire stripper or scissors, & zip ties.... easy afternoon project with great results.

https://www.4x4truckleds.com/vehicl...2017-2018-f-150-raptor/triple-fog-light-kits/


Included with each kit are the following:

• 1 Pair of CrystaLux Triple Fog Light Brackets
  
• Mounting Hardware
• 3 Pairs of Lights
  
• All-In-One Wiring Harness to connect to your OEM upfitter switches (each pair of lights will have independent control via your OEM upfitter switches)
• Instructions
• Our "Raptor Lifetime Guarantee". For as long as you own your Raptor, if you manage to break/bend/destroy these brackets we'll replace them free of charge (not including return shipping)

 

[4x4TruckLEDs.com]

Here's what Darren had to say about his recent Triple Fog Light Kit from us

Had a terrific experience picking up a fog light kit for my Raptor. Straight forward, brackets and wiring was setup great, love the lights, and great customer service. I'll be back for more.

Thanks for the business Darren. Trucks looking good now!

 

[dmb359]

Here's what Darren had to say about his recent Triple Fog Light Kit from us



Thanks for the business Darren. Trucks looking good now!

All aimed and ready to go now too.

Thanks again, they look great.


Sent from my iPhone using Tapatalk