Transmission jumping out of gear

[tmp123]

Guys,

Great write up... )

Question? I have my engine out and waiting for a Livernois 6.6 L long block.

Since the engine is out , i can get at the torque converter and tranny. Any suggestions? should I proactively replace the tq converter or just upgrade the transmission. Trans has 190k on it.

Any advice is appreciated

 

[BSouders80]

Upgrade the transmission and torque converter. You are going to have to at some point. Caveat is the transmission portion will take you about 2 months.

 

[BSouders80]

For what it’s worth - torque converter from Circle D stalls at about 1800 rpms

 

[tmp123]

Why 2 months?

 

[BSouders80]

Circle D may be more than 2 months all said and done. That number was based on customers ahead of me and lead time to order parts once order is placed.

MS Racing is quicker on getting the parts. Depends on their race schedules to how quickly they get it done. Parts with MS Racing took about 2 weeks to get once order is placed.

 

[tmp123]

would you happen to have a link for MS racing
Thanks

 

[BSouders80]

MSRacing | noGMparts | 6R80 & 10R80 Transmission Builds | Brett LaSala

Upgrade your 6R80 or 10R80 Transmission. Replacement of all clutches and steels with high performance Exedy stage 2 parts with 40% more friction surface than stock. Replacement billet intermediate shaft, MSR billet foward planetary.

www.msr-nogmparts.com

 

[itoito06]

MSRacing | noGMparts | 6R80 & 10R80 Transmission Builds | Brett LaSala

Upgrade your 6R80 or 10R80 Transmission. Replacement of all clutches and steels with high performance Exedy stage 2 parts with 40% more friction surface than stock. Replacement billet intermediate shaft, MSR billet foward planetary.

www.msr-nogmparts.com

Hate to revive this old-ish thread, but do you happen to have the part number for the melted transmission wiring harness? Mine is burnt up as well. Its currently still working, but its something i'd like to replace before it becomes a bigger issue and route it properly.

Thanks

 

[BSouders80]

Call your local ford dealer with your vin #. Tell them that you need the harness to run from pcm to transmission. I had mine in hand the next day. Seemed like it was around $240???

 

[PipeHitter]

@BSouders80 How have you been liking the transmission? Notice any drivability differences between it being built and when it was stock?