Traction Boards and elastic strap

[Nex]

I went with Bunman Recovery recommended Billet 4x4 kinetic rope and soft shackles. 1.5" x 30'

Billet4X4.com - PolyGuard Kinetic Recovery Rope

OKoffroad.com - PolyGuard Kinetic Recovery Rope

www.billet4x4.com

Not cheap, but quality rope made in the US.

 

[Chuckaroo91]

Buy once, cry once. Finally got them mounted in an out of the way spot with the Builtright bulkhead bar.

You're the hero from Facebook who gave me the links to all of this. Was able to finally get my boards mounted nicely. Thank you!

 

[4wheelinAZ]

You're the hero from Facebook who gave me the links to all of this. Was able to finally get my boards mounted nicely. Thank you!

View attachment 381541

That is me sir! Glad they worked out. Looks fantastic. Diggin the tan ones!

 

[figure1a]

Go Maxxtrax. Buy once, cry once. Also, keep them out of the sun when you aren't off roading. As in, if you only off-road once in a while, then load them up for that date. You see guys with these things strapped and bolted to the top of their truck racks while at work all week long. Eventually, the sun will eat/weaken anything plastic. So, leave them on the roof for 5 years and when you finally use the, don't be surprised when they snap.

 

[JorgesRaptor]

Buy once, cry once. Finally got them mounted in an out of the way spot with the Builtright bulkhead bar.

Damnit. Ok what’s all in this beside the builtright and the boards, anything special to attach them?

 

[John M BUNMAN]

Go Maxxtrax. Buy once, cry once. Also, keep them out of the sun when you aren't off roading. As in, if you only off-road once in a while, then load them up for that date. You see guys with these things strapped and bolted to the top of their truck racks while at work all week long. Eventually, the sun will eat/weaken anything plastic. So, leave them on the roof for 5 years and when you finally use the, don't be surprised when they snap.

Really?? How the hell am I supposed to look rugged Rolling through bucks in my skinny jeans , what about my empty water and fuel RoTex plastic cans and my pristine chovel?? I have to rethink my whole rig now….THANKS A LOT

 

[John M BUNMAN]

You're the hero from Facebook who gave me the links to all of this. Was able to finally get my boards mounted nicely. Thank you!

View attachment 381541

WHERE THE HELL IS ALL YOUR SHIXT??
So that’s what the bed of Raptor looks like nice…
You need to Read, in it’s entirety, the What I carry on the Trail thread. Hell I carry so much shixt, I have to do a quarterly inventory. I have shixt I don’t even know how to use, but some jerk on FRF posted it, said how great it was and now I have it!?!

 

[smurfslayer]

Bunman: This is too easy.
You need to roll into starbucks with that bed cover popped to illustrate your preparedness to the unwashed peasants. Bearing in mind that you may park up front at any Starbucks, ICEing any electrics notwithstanding, this will make up for not being able to show off the maxxtrax.

Also, with all that stuff in the bed, where are your hefty large sacks, drop cloths, disposable pierce resistant gloves, zip ties, gorilla tape, ski mask, and hoodie?
Asking for a friend.

 

[John M BUNMAN]

Also, with all that stuff in the bed, where are your hefty large sacks, drop cloths, disposable pierce resistant gloves, zip ties, gorilla tape, ski mask, and hoodie?
Asking for a friend.

@smurfslayer , tell your “friend“ , all of the above is in a bag, next to the Machetes, Bone Saw Axe and gallon of bleach

 

[4wheelinAZ]

Damnit. Ok what’s all in this beside the builtright and the boards, anything special to attach them?

Unfortunately yes, you need maxtrax mounts that attach to the Builtright rail. I went with Axia alloys mounts. All this is definitely not the cheapest route, but these damn things DONT MOVE