GEN 2 Tire and wheels weights

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

grantoser

Full Access Member
Joined
Sep 26, 2012
Posts
249
Reaction score
68
Hey guys,

Considering getting new wheels tires for my new raptor.
I really like the look of the new nitto ridge grapplers. I would get 35x12.5r17 which look to be 75 pounds.
Does anyone know what the stock bfgs weigh?


It also looks like the stock beadlock wheels weight 37 pounds.
Does anyone know what the Icon Rebound 17s weight?


Just trying to stay as close to original weight as I can...

Thanks!
Grant

---------- Post added at 07:51 PM ---------- Previous post was at 07:40 PM ----------

@Icon_Fred
 

Nick@Apollo-Optics

Supporting Vendor
Supporting Vendor
Joined
Apr 3, 2011
Posts
7,475
Reaction score
3,125
Location
Houston, TX
Hey guys,

Considering getting new wheels tires for my new raptor.
I really like the look of the new nitto ridge grapplers. I would get 35x12.5r17 which look to be 75 pounds.
Does anyone know what the stock bfgs weigh?


It also looks like the stock beadlock wheels weight 37 pounds.
Does anyone know what the Icon Rebound 17s weight?


Just trying to stay as close to original weight as I can...

Thanks!
Grant

---------- Post added at 07:51 PM ---------- Previous post was at 07:40 PM ----------

@Icon_Fred

It sounds like the new Vorsteiner VenomRex 602 wheels will be right up you alley and we are launching a preorder for them soon!

The weight is 24lbs per wheel and load rated at 2600lbs.

Not sure on the Icon wheels weight, but we do carry those as well.

As for the stock wheels, base wheels weigh 34lbs each and beadlocks weigh 37lbs each.
 
OP
OP
grantoser

grantoser

Full Access Member
Joined
Sep 26, 2012
Posts
249
Reaction score
68
It sounds like the new Vorsteiner VenomRex 602 wheels will be right up you alley and we are launching a preorder for them soon!

The weight is 24lbs per wheel and load rated at 2600lbs.

Not sure on the Icon wheels weight, but we do carry those as well.

As for the stock wheels, base wheels weigh 34lbs each and beadlocks weigh 37lbs each.

Id love to see a photo of them when they are released!
 

rtmozingo

FRF Addict
Joined
Aug 3, 2017
Posts
1,142
Reaction score
748
Location
North Texas
I've got a spreadsheet I've been putting together that compares all the important specs. I'll try to remember to upload it. Regardless, I don't intend to get the KO2s again.

Both the Toyo RT and Nitto RG would be in the running but they are a good 7-10lbs heavier than alternatives, and that's just too much.

I've decided on the Cooper ST Maxx as my next tire. About 3 pounds heavier per tire, but better than the KO2 in every way, according to everyone I've talked to that has run both.

Strangely enough, the D rated KO2 (which I would get over the Cs again) is a few pounds lighter than the Cs.
 

Nick@Apollo-Optics

Supporting Vendor
Supporting Vendor
Joined
Apr 3, 2011
Posts
7,475
Reaction score
3,125
Location
Houston, TX
We added Nitto Ridge Grapplers that are 325/60/20 Load Range E due to the lower weight when we added the Vorsteiner VenomRex 601 wheels to our truck. They're a full size 35 and do rub a tad at full lock. But with the decrease weight from the 601 wheels, we actually lost 0.5lbs at each corner and got the beefier tires.
 
Top