Start stop jump

[Drswiger]

2018 Raptor start stop wiring
I’ve seen multiple videos on “upping the wires on the start stop function, but all with a duel switch. I haven’t seen the solitary switch like my 2018
What two wires are jump?, the white and purple or the white and purple/black wire?
Thanks

 

[Robtor310]

If your wires are different you can ohm it out with a DVM.

Also theres this recent thread too
https://www.fordraptorforum.com/threads/auto-start-disabling-option.66052/

 

[Drswiger]

Thanks. I’ve seen this vid. I have a single switch, not the duel switch with hazard. I was just seeing if anyone had the single switch and could tell me the wires. I’ll get the multimeter out.

 

[desertspeed]

There is another thread about this in the Audio forum as well- I just posted this there...

I just did this over the weekend and it is very easy and definitely works. The hardest part was finding the right size wire to use. 18g is too large to fit in the slots in the connector, and 24g wire is too flexible to push in completely. I ended up using a short (1") section of 0.035 welding wire bent in a "u" shape. It fit perfectly in the slots and it takes a pretty good pull for it to come out, enough that there is no need to secure it with electrical tape.

On my 2018 I jumped the 3rd (white wire) and 4th (purple/black wire) pins from the right.

 

[Drswiger]

Thanks brother