Show off your latest pics

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

TomDirt

FRF Addict
Joined
Jan 3, 2022
Posts
3,310
Reaction score
9,361
Location
Hesperia CA
D-side Gen 2 Fox with SVC coil adjusters ready to assemble. I'm going to set this side at 1.5" height above the coil sleeve, and the P-side will be about .250" lower, (per their recommendation); and I'm reusing the original coil springs.

BTW, it's really nice having the Branick spring compressor in your garage. I cannot mount or balance tires, charge shocks, or do an alignment here, but pretty much everything else; can be done on my schedule .
 

Attachments

  • 20241026_112758.jpg
    20241026_112758.jpg
    212.5 KB · Views: 3
  • 20241026_112813.jpg
    20241026_112813.jpg
    167.3 KB · Views: 3

TomDirt

FRF Addict
Joined
Jan 3, 2022
Posts
3,310
Reaction score
9,361
Location
Hesperia CA
Done. BTW, you need a 19mm open socket-style ratcheting wrench and a 5/16" or 8mm socket to slip  inside, to secure the top nut.
 

Attachments

  • 20241026_124333.jpg
    20241026_124333.jpg
    183.4 KB · Views: 4
Top