Shackles that work for Icons

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

M_NorthRaptor

Full Access Member
Joined
Feb 28, 2019
Posts
146
Reaction score
65
Location
British Columbia, Canada
I'm about to install the Icon leaf spring kit 95225 on my '19 raptor and was wondering what brands make DROP shackles that work with the military wrapped leafs from icon.
 

ZackZ

Full Access Member
Joined
Feb 6, 2019
Posts
144
Reaction score
53
Location
Michigan
Rpg billet and KHC. I have a set of KHC plus 1s if your interested shoot me a message
 

WRCRaptor

FRF Addict
Joined
Feb 12, 2013
Posts
1,604
Reaction score
974
Location
Great Lakes
Installed Black +2 billet RPGs today on my Icon springs Option 3. I ran the stock shackles for about 1800 miles at option 3 expecting a bit sag that has not happened. My truck was to high in the rear even with Eibachs up front and now looks close to level front to rear.
 

Carlos C

Member
Joined
Feb 5, 2020
Posts
17
Reaction score
8
Location
Sugarland TX
Installed Black +2 billet RPGs today on my Icon springs Option 3. I ran the stock shackles for about 1800 miles at option 3 expecting a bit sag that has not happened. My truck was to high in the rear even with Eibachs up front and now looks close to level front to rear.

Do you have before and after measurements for the rear?
I'm also installing the Icons with the +2 Extended Billet RPG Shackles and would like to keep it as close to stock height as possible.
Not sure if I will do Stage 1 or 2 on the leafs.
 
OP
OP
M_NorthRaptor

M_NorthRaptor

Full Access Member
Joined
Feb 28, 2019
Posts
146
Reaction score
65
Location
British Columbia, Canada
Thanks for all the info everyone!
I am rather fond of the rpg billet shackles just not the price tag haha.
I installed my leafs in option 2 with stock shackles for now. Definitely going to need them since cycling the suspension I'm already seeing the leafs rubbing the exhaust at full droop.
If anything I would only want to drop the rear 1" max since I do haul gear when offroading.
 

WRCRaptor

FRF Addict
Joined
Feb 12, 2013
Posts
1,604
Reaction score
974
Location
Great Lakes
Do you have before and after measurements for the rear?
I'm also installing the Icons with the +2 Extended Billet RPG Shackles and would like to keep it as close to stock height as possible.
Not sure if I will do Stage 1 or 2 on the leafs.

Option 3 no load, 1/2 fuel
RR 44 1/2". this one dropped 1/4 over 1800 miles to 44 1/4
LR 44"

Option 3 & RPG 2" over stk. shakes no load, 1/2 Fuel
RR 43 1/4
LR 43"

These measurements were taken 3 months, 1800 miles apart. The right rear spring actually dropped 1/4" in that time so the 2" over shackle drop is a 1" drop as advertised.

These measurements were taken from the ground to the fender flare on the center line of the wheels.
 

Carlos C

Member
Joined
Feb 5, 2020
Posts
17
Reaction score
8
Location
Sugarland TX
Option 3 no load, 1/2 fuel
RR 44 1/2". this one dropped 1/4 over 1800 miles to 44 1/4
LR 44"

Option 3 & RPG 2" over stk. shakes no load, 1/2 Fuel
RR 43 1/4
LR 43"

These measurements were taken 3 months, 1800 miles apart. The right rear spring actually dropped 1/4" in that time so the 2" over shackle drop is a 1" drop as advertised.

These measurements were taken from the ground to the fender flare on the center line of the wheels.

Awesome, Thank You!
 
Top