GEN 2 Sdhq +2/+2 vs adv front fenders.

[mattl600]

Hey all! Have some venom 00 offset wheels coming and eventually want to go with some +2 glass up front for the SVC mid travel setup I’m eventually going to jump into next year.

very curious about liners. I know ADV offers this additionally but can’t seem to find any pictures.

do both j close the vents built in as well as flares ?

 

[Jakenbake]

Hey all! Have some venom 00 offset wheels coming and eventually want to go with some +2 glass up front for the SVC mid travel setup I’m eventually going to jump into next year.

very curious about liners. I know ADV offers this additionally but can’t seem to find any pictures.

do both j close the vents built in as well as flares ?

If you are planning to go with their mid travel, you may want to check with them on clearance with a +2 fender.

I know on the gen 1 it seemed like most people needed a plus 4 to really clear the svc mid travel.

Plus 2’s may work with why you have planned depending on a few variable. I just know glass isn’t cheap to do right and wouldn’t want you to have to do it twice.

 

[mattl600]

If you are planning to go with their mid travel, you may want to check with them on clearance with a +2 fender.

I know on the gen 1 it seemed like most people needed a plus 4 to really clear the svc mid travel.

Plus 2’s may work with why you have planned depending on a few variable. I just know glass isn’t cheap to do right and wouldn’t want you to have to do it twice.

great idea. I know SVC does rep the ADV in their site.

 

[jondle]

What @Jakenbake said. With 37s, my Gen1 with Fiberwerx +2/+2 with stock travel barely fit. Increased travel and offset are definitely going to want more than +2.

I don't know about liners with those. I can tell you I'm using stock liners and they've been a bit of a nightmare. I ended up using big fender washers and self tapping screws to keep them where they need to be.